Combination Units

Standard and Servo Combination System

Combination SystemsCombo Unit 1Combine two or more different machines in your process and create a combination system for greater efficiency and control. Whether you are using a standard or servo motor and drives, CDS can customize a combination system to any application.

Combination Belt Puller/C-Sharp Cutter Specifications (CCBVSH Series)

Standard FeaturesCCBVSH 9.5-125CCBVSH 2-25CCBVSH 3-25CCBVSH 4-45CCBVSH 6-65
Puller Specification
Conveyer length9.5″18″18″25″25″
Conveyor width2″2″3″4″6″
Contact Area for 2″9.5″ L x 2″ W18″ L x 2″ W
Contact Area for 3″18″ L x 3″ W
Contact Area for 4″25″ L x 4″ W
Contact Area for 6″25″ L x 4″ W
Max. Conveyor Opening3″3″3″7″7″
Manual self-centering conveyor heght adjustmentYesYesYes
Manual individual beam height adjustmentYesYes
Adjustable entrance guide rollersYesYesYesYesYes
Duragrip Puregum beltsYesYesYesYesYes
Vector motor/drive control systemYesYesYesYesYes
Digital speed displayYesYesYesYesYes
10 turn Potentiometer speed adjustmentYesYesYesYesYes
Master/Follower seclector switchYesYesYesYesYes
Cutter Specification
Cutting Capacity1″ OD2.25″ OD2.25″ OD4.25″ OD6″ OD
Bushing Diameter1.5″ OD2.5″ OD2.5″ OD4.5″ OD6.5″ OD
Maximum Cut length19,999.99″19,999.99″19,999.99″19,999.99″19,999.99″
Longitudinal setting12″12″12″12″12″
Cut length accuracy +/- .030 inchYesYesYesYesYes
Integrated Electronic Length Control with encoderYesYesYesYesYes
Easy choice of cut length on Touch ScreenYesYesYesYesYes
Robust frame provides additional stability and supportYesYesYesYesYes
Longer safety tunels at entrace and exitYesYesYesYesYes
Commun Options
Line direction:
Right to LeftYesYesYesYesYes
Left to RigthYesYesYesYesYes
Safety Options :
Safety enclosureOpt.Opt.Opt.Opt.Opt.
CSA – UL InspectionOpt.Opt.Opt.Opt.Opt.
Electrics:
230-460-575V AC / 3PH /  60 Hz, 380-400V AC / 3PH / 50 HzYesYesYesYesYes
Puller Options
Clamping Option:
Upper beam Pneumatic ClampingOpt.Opt.Opt.Opt.Opt.
Bottom conveyor fixed/adjustable top conveyorOpt.Opt.Opt.Opt.Opt.
 Remote control Option:
50′ remote controlOpt.Opt.Opt.Opt.Opt.
75′ remote controlOpt.Opt.Opt.Opt.Opt.
100′ remote controlOpt.Opt.Opt.Opt.Opt.
Motor control Option:
Inverter motor/drive control systemOpt.Opt.Opt.Opt.Opt.
Vector direct drive (2 motors, 2 drives, 2 gear boxes) control systemOpt.Opt.Opt.Opt.Opt.
Servo motor/drive control system includes touch screenOpt.Opt.Opt.Opt.Opt.
Servo direct drive (2 motors, 2 drives, 2 gear boxes) control system includes touch screenOpt.Opt.Opt.Opt.Opt.
Belt option:
Natural rubberOpt.Opt.Opt.Opt.Opt.
FDA-compliantOpt.Opt.Opt.Opt.Opt.
Belt contourred to productOpt.Opt.Opt.Opt.Opt.
Footage counter options:
Mechanical Footage CounterOpt.Opt.Opt.Opt.Opt.
Digital Footage CounterOpt.Opt.Opt.Opt.Opt.
Length CounterOpt.Opt.Opt.Opt.Opt.
Patriot GAP IndicatorOpt.Opt.Opt.Opt.Opt.
Other options:
Dual configuration application on common base or stager depending on Y-block configurationOpt.Opt.Opt.Opt.Opt.
Touch screen operational control (not servo)Opt.Opt.Opt.Opt.Opt.
CustomizableYesYesYesYesYes
Cutter Options
Other Options:
Optional blade lubrification mistOpt.Opt.Opt.Opt.Opt.
Optional blade lubrification with bottle and blade wipeOpt.Opt.Opt.Opt.Opt.
Optional blade heater systemOpt.Opt.Opt.Opt.Opt.
Stainless steel cutter bushingOpt.Opt.Opt.Opt.Opt.
Stainless steel cutter headOpt.Opt.Opt.Opt.Opt.
Dual configuration application on common base or stager depending on Y-block configurationOpt.Opt.Opt.Opt.Opt.
CustomizableYesYesYesYesYes

Combination Belt Puller/Servo Fly-Knife Cutter Specifications (CCBSSK Series)

Standard FeaturesCCBSSK 9.5-125CCBSSK 2-25CCBVSSK 3-25CCBVSSK 4-45CCBVSSK 6-45
Puller Specification
Conveyer length9.5″18″18″25″25″
Conveyor width2″2″3″4″6″
Contact Area for 2″9.5″ L x 2″ W18″ L x 2″ W
Contact Area for 3″18″ L x 3″ W
Contact Area for 4″25″ L x 4″ W
Contact Area for 6″25″ L x 6″ W
Max. Conveyor Opening3″3″3″7″7″
Manual self-centering conveyor heght adjustmentYesYesYes
Manual individual beam height adjustmentYesYes
Adjustable entrance guide rollersYesYesYesYesYes
Duragrip Puregum beltsYesYesYesYesYes
Vector motor/drive control systemYesYesYesYesYes
Digital speed displayYesYesYesYesYes
10 turn Potentiometer speed adjustmentYesYesYesYesYes
Master/Follower seclector switchYesYesYesYesYes
Cutter Specification
Cutting Capacity1″ OD2.25″ OD2.25″ OD4.25″ OD4.25″ OD
Bushing Diameter1.5″ OD2.5″ OD2.5″ OD4.5″ OD4.5″ OD
Maximum Cut length999,999.99″999,999.99″999,999.99″999,999.99″999,999.99″
Longitudinal setting12″12″12″12″12″
Cut length accuracy +/- .015 inchYesYesYesYesYes
Integrated Electronic Length Control with encoderYesYesYesYesYes
Batch CountYesYesYesYesYes
Programmable recipiesYesYesYesYesYes
Easy choice of cut length on Touch ScreenYesYesYesYesYes
Robust frame provides additional stability and supportYesYesYesYesYes
Longer safety tunels at entrace and exitYesYesYesYesYes
Commun Options
Line direction:
Right to LeftYesYesYesYesYes
Left to RigthYesYesYesYesYes
Safety Options :
Safety enclosureOpt.Opt.Opt.Opt.Opt.
CSA – UL InspectionOpt.Opt.Opt.Opt.Opt.
Electrics:
230-460-575V AC / 3PH /  60 Hz, 380-400V AC / 3PH / 50 HzYesYesYesYesYes
Puller Options
Clamping Option:
Upper beam Pneumatic ClampingOpt.Opt.Opt.Opt.Opt.
Bottom conveyor fixed/adjustable top conveyorOpt.Opt.Opt.Opt.Opt.
 Remote control Option:
50′ remote controlOpt.Opt.Opt.Opt.Opt.
75′ remote controlOpt.Opt.Opt.Opt.Opt.
100′ remote controlOpt.Opt.Opt.Opt.Opt.
Motor control Option:
Inverter motor/drive control systemOpt.Opt.Opt.Opt.Opt.
Vector direct drive (2 motors, 2 drives, 2 gear boxes) control systemOpt.Opt.Opt.Opt.Opt.
Servo motor/drive control system includes touch screenOpt.Opt.Opt.Opt.Opt.
Servo direct drive (2 motors, 2 drives, 2 gear boxes) control system includes touch screenOpt.Opt.Opt.Opt.Opt.
Belt option:
Natural rubberOpt.Opt.Opt.Opt.Opt.
FDA-compliantOpt.Opt.Opt.Opt.Opt.
Belt contourred to productOpt.Opt.Opt.Opt.Opt.
Footage counter options:
Mechanical Footage CounterOpt.Opt.Opt.Opt.Opt.
Digital Footage CounterOpt.Opt.Opt.Opt.Opt.
Length CounterOpt.Opt.Opt.Opt.Opt.
Patriot GAP IndicatorOpt.Opt.Opt.Opt.Opt.
Other options:
Dual configuration application on common base or stager depending on Y-block configurationOpt.Opt.Opt.Opt.Opt.
Touch screen operational control (not servo)Opt.Opt.Opt.Opt.Opt.
CustomizableYesYesYesYesYes
Cutter Options
Other Options:
Optional blade lubrification mistOpt.Opt.Opt.Opt.Opt.
Optional blade lubrification with bottle and blade wipeOpt.Opt.Opt.Opt.Opt.
Optional blade heater systemOpt.Opt.Opt.Opt.Opt.
Stainless steel cutter bushingOpt.Opt.Opt.Opt.Opt.
Stainless steel cutter headOpt.Opt.Opt.Opt.Opt.
Dual configuration application on common base or stager depending on Y-block configurationOpt.Opt.Opt.Opt.Opt.
Planetary gearbox for extra cutting torque Model changed to HTYesYesYesYesYes
CustomizableYesYesYesYesYes

Combination Belt Puller/Rotary Fly-Knife Cutter Specifications (CCBVSRK Series)

Standard FeaturesCCBVSRK 25-45CCBVSRK 25-65CCBVSRK 36-65CCBVSRK 36-8CCBVSRK 48-8CCBVSRK 60-8
Puller Specification
Conveyer length25″25″36″36″45″60″
Conveyor width4″6″6″8″8″8″
Contact Area for 4″25″ L x 4″ W
Contact Area for 6″25″ L x 6″ W36″ L x 6″ W36″ L x 6″ W
Contact Area for 8″45″ L x 8″ W45″ L x 8″ W
Max. Conveyor Opening7″7″7″7″7″7″
Manual individual beam height adjustmentYesYesYesYesYesYes
Adjustable entrance guide rollersYesYesYesYesYesYes
Duragrip Puregum beltsYesYesYesYesYesYes
Vector motor/drive control systemYesYesYesYesYesYes
Digital speed displayYesYesYesYesYesYes
10 turn Potentiometer speed adjustmentYesYesYesYesYesYes
Master/Follower seclector switchYesYesYesYesYesYes
Cutter Specification
Cutting Capacity4.25″ OD6.25″ OD6.25″ OD8.25″ OD8.25″ OD8.25″ OD
Bushing Diameter4.5″ OD6.5″ OD6.5″ OD8.5″ OD8.5″ OD8.5″ OD
Maximum Cut length999,999.99″999,999.99″999,999.99″999,999.99″999,999.99″999,999.99″
Cut length accuracy +/- .062 inchYesYesYesYesYesYes
Integrated Electronic Length Control with encoderYesYesYesYesYesYes
Batch CountYesYesYesYesYesYes
Programmable recipiesYesYesYesYesYesYes
Easy choice of cut length on Touch ScreenYesYesYesYesYesYes
Robust frame provides additional stability and supportYesYesYesYesYesYes
Longer safety tunels at entrace and exitYesYesYesYesYesYes
Commun Options
Line direction:
Right to LeftYesYesYesYesYesYes
Left to RigthYesYesYesYesYesYes
Safety Options :
Safety enclosureOpt.Opt.Opt.Opt.Opt.Opt.
CSA – UL InspectionOpt.Opt.Opt.Opt.Opt.Opt.
Electrics:
230-460-575V AC / 3PH /  60 Hz, 380-400V AC / 3PH / 50 HzYesYesYesYesYesYes
Puller Options
Clamping Option:
Upper beam Pneumatic ClampingOpt.Opt.Opt.Opt.Opt.Opt.
Bottom conveyor fixed/adjustable top conveyorOpt.Opt.Opt.Opt.Opt.Opt.
 Remote control Option:
50′ remote controlOpt.Opt.Opt.Opt.Opt.Opt.
75′ remote controlOpt.Opt.Opt.Opt.Opt.Opt.
100′ remote controlOpt.Opt.Opt.Opt.Opt.Opt.
Motor control Option:
Inverter motor/drive control systemOpt.Opt.Opt.Opt.Opt.Opt.
Vector direct drive (2 motors, 2 drives, 2 gear boxes) control systemOpt.Opt.Opt.Opt.Opt.Opt.
Servo motor/drive control system includes touch screenOpt.Opt.Opt.Opt.Opt.Opt.
Servo direct drive (2 motors, 2 drives, 2 gear boxes) control system includes touch screenOpt.Opt.Opt.Opt.Opt.Opt.
Belt option:
Natural rubberOpt.Opt.Opt.Opt.Opt.Opt.
FDA-compliantOpt.Opt.Opt.Opt.Opt.Opt.
Belt contourred to productOpt.Opt.Opt.Opt.Opt.Opt.
Footage counter options:
Mechanical Footage CounterOpt.Opt.Opt.Opt.Opt.Opt.
Digital Footage CounterOpt.Opt.Opt.Opt.Opt.Opt.
Length CounterOpt.Opt.Opt.Opt.Opt.Opt.
Patriot GAP IndicatorOpt.Opt.Opt.Opt.Opt.Opt.
Other options:
Dual configuration application on common base or stager depending on Y-block configurationOpt.Opt.Opt.Opt.Opt.Opt.
Touch screen operational control (not servo)Opt.Opt.Opt.Opt.Opt.Opt.
CustomizableYesYesYesYesYesYes
Cutter Options
Other Options:
Optional blade lubrification mistOpt.Opt.Opt.Opt.Opt.Opt.
Optional blade lubrification with bottle and blade wipeOpt.Opt.Opt.Opt.Opt.Opt.
Optional blade heater systemOpt.Opt.Opt.Opt.Opt.Opt.
Stainless steel cutter bushingOpt.Opt.Opt.Opt.Opt.Opt.
Stainless steel cutter headOpt.Opt.Opt.Opt.Opt.Opt.
Dual configuration application on common base or stager depending on Y-block configurationOpt.Opt.Opt.Opt.Opt.Opt.
CustomizableYesYesYesYesYesYes

Combination Cleat Puller/Travelling Saw Specifications (CCHS Series)

Standard FeaturesCCHS 60-45CCHS 60-55CCHS 72-45CCHS 72-55CCHS 72-65CCHS 96-55CCHS 96-65CCHS 120-65CCHS 144-65
Cleat Puller Specification
Conveyer length60″60″72″72″72″96″96″120″144″
Conveyor width available in: 10″ 10″ 10″ 10″ 10″ 10″ 10″ 10″ 10″
Contact Area for 10″60″ L x 10″ W60″ L x 10″ W72″ L x 10″ W72″ L x 10″ W72″ L x 10″ W96″ L x 10″ W96″ L x 10″ W120″ L x 10″ W144″ L x 10″ W
Max. Conveyor Opening6″6″6″6″6″6″6″6″6″
Fixed Bottom ConveyerYesYesYesYesYesYesYesYesYes
Upper beam Pneumatic ClampingYesYesYesYesYesYesYesYesYes
Adjustable entrance guide rollersYesYesYesYesYesYesYesYesYes
Chain drive systemYesYesYesYesYesYesYesYesYes
Quick Change CleatsYesYesYesYesYesYesYesYesYes
50′ remote controlYesYesYesYesYesYesYesYesYes
Vector motor/drive control systemYesYesYesYesYesYesYesYesYes
Digital speed displayYesYesYesYesYesYesYesYesYes
10 turn Potentiometer speed adjustmentYesYesYesYesYesYesYesYesYes
Master/Follower seclector switchYesYesYesYesYesYesYesYesYes
Saw Specification
Cut Window Profile4.5″ x 8″5.5″ x 9″4.5″ x 8″5.5″ x 9″6.5″ x 13″5.5″ x 9″6.5″ x 13″6.5″ x 13″6.5″ x 13″
Cut Window Pipe4.5″OD5.5″ OD4.5″OD5.5″ OD6.5″ OD5.5″ OD6.5″ OD6.5″ OD6.5″ OD
Carbide Tipped Saw Blade Diameter14″16″14″16″18″16″18″18″18″
Brake motor for quick blade stopYesYesYesYesYesYesYesYesYes
Robust frame provides additional stability and supportYesYesYesYesYesYesYesYesYes
Commun Options
Line direction:
Right to LeftYesYesYesYesYesYesYesYesYes
Left to RigthYesYesYesYesYesYesYesYesYes
Safety Options :
CSA – UL InspectionOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Safety enclosureYesYesYesYesYesYesYesYesYes
Electrics:
230-460-575V AC / 3PH /  60 Hz, 380-400V AC / 3PH / 50 HzYesYesYesYesYesYesYesYesYes
Puller Options
 Remote control Option:
75′ remote controlOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
100′ remote controlOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Motor control Option:
Inverter motor/drive control systemOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Servo motor/drive control system includes touch screenOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Servo direct drive (2 motors, 2 drives, 2 gear boxes) control system includes touch screenOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Other options:
Dual configuration application on common base or stager depending on Y-block configurationOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Touch screen operational control (not servo)Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Footage counter options:
Mechanical Footage CounterOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Digital Footage CounterOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Length CounterOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Patriot GAP IndicatorOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
CustomizableYesYesYesYesYesYesYesYesYes
Saw Options
Dust Collection Options:
Vacuum Dust/Chip collector CVF1Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Vacuum Dust/Chip collector CVF2Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Vacuum Dust/Chip collector CKVF3Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Vacuum Dust/Chip collector CKVF5Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Other Options:
Variable saw speedOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Dual configuration application on common base or stager depending on Y-block configurationOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Air Blow-off for dust on productOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Touch screen operational control (not servo)Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Soft Start and soft stop for blade rotationOpt.Opt.Opt.Opt.Opt.
CustomizableYesYesYesYesYesYesYesYesYes

Combination Cleat Puller/Travelling Servo Saw Specifications (CCHSS Series)

Standard FeaturesCCHSS 60-45CCHSS 60-55CCHSS 72-45CCHSS 72-55CCHSS 72-65CCHSS 96-55CCHSS 96-65CCHSS 120-65CCHS 144-65
Cleat Puller Specification
Conveyer length60″60″72″72″72″96″96″120″144″
Conveyor width available in: 10″ 10″ 10″ 10″ 10″ 10″ 10″ 10″ 10″
Contact Area for 10″60″ L x 10″ W60″ L x 10″ W72″ L x 10″ W72″ L x 10″ W72″ L x 10″ W96″ L x 10″ W96″ L x 10″ W120″ L x 10″ W144″ L x 10″ W
Max. Conveyor Opening6″6″6″6″6″6″6″6″6″
Fixed Bottom ConveyerYesYesYesYesYesYesYesYesYes
Upper beam Pneumatic ClampingYesYesYesYesYesYesYesYesYes
Adjustable entrance guide rollersYesYesYesYesYesYesYesYesYes
Chain drive systemYesYesYesYesYesYesYesYesYes
Quick Change CleatsYesYesYesYesYesYesYesYesYes
50′ remote controlYesYesYesYesYesYesYesYesYes
Vector motor/drive control systemYesYesYesYesYesYesYesYesYes
Digital speed displayYesYesYesYesYesYesYesYesYes
10 turn Potentiometer speed adjustmentYesYesYesYesYesYesYesYesYes
Master/Follower seclector switchYesYesYesYesYesYesYesYesYes
Saw Specification
Cut Window Profile4.5″ x 85″ x 5″4.5″ x 85″ x 5″6.5″ x 13″5″ x 5″6.5″ x 13″6.5″ x 13″6.5″ x 13″
Cut Window Pipe4.5″ OD5″ OD4.5″ OD5″ OD6.5″ OD5″ OD6.5″ OD6.5″ OD6.5″ OD
Carbide Tipped Saw Blade Diameter14″16″14″16″18″16″18″18″18″
Brake motor for quick blade stopYesYesYesYesYesYesYesYesYes
Cut length accuracy +/- .015 inchYesYesYesYesYesYesYesYesYes
Integrated Electronic Length Control with encoderYesYesYesYesYesYesYesYesYes
Batch CountYesYesYesYesYesYesYesYesYes
Programmable recipiesYesYesYesYesYesYesYesYesYes
Easy choice of cut length on Touch ScreenYesYesYesYesYesYesYesYesYes
Robust frame provides additional stability and supportYesYesYesYesYesYesYesYesYes
Vacuum Dust/Chip CollectorYesYesYesYesYesYesYesYesYes
Commun Options
Line direction:
Right to LeftYesYesYesYesYesYesYesYesYes
Left to RigthYesYesYesYesYesYesYesYesYes
Safety Options :
CSA – UL InspectionOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Safety enclosureYesYesYesYesYesYesYesYesYes
Electrics:
230-460-575V AC / 3PH /  60 Hz, 380-400V AC / 3PH / 50 HzYesYesYesYesYesYesYesYesYes
Puller Options
 Remote control Option:
75′ remote controlOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
100′ remote controlOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Motor control Option:
Inverter motor/drive control systemOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Servo motor/drive control system includes touch screenOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Servo direct drive (2 motors, 2 drives, 2 gear boxes) control system includes touch screenOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Other options:
Dual configuration application on common base or stager depending on Y-block configurationOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Touch screen operational control (not servo)Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Footage counter options:
Mechanical Footage CounterOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Digital Footage CounterOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Length CounterOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Patriot GAP IndicatorOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
CustomizableYesYesYesYesYesYesYesYesYes
Saw Options
Dust Collection Options:
Vacuum Dust/Chip collector CKVF3Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Vacuum Dust/Chip collector CKVF5Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Other Options:
Variable saw speedOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Dual configuration application on common base or stager depending on Y-block configurationOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Air Blow-off for dust on productOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Soft Start and soft stop for blade rotationOpt.Opt.Opt.Opt.Opt.
CustomizableYesYesYesYesYesYesYesYesYes

Combination Cleat Puller/Traveling Hot Knife Specifications (CCHCutPro Series)

Standard FeaturesCCHCutPro 60-200CCHCutPro 60-400CCHCutPro 72-200CCHCutPro 72-400CCHCutPro 96-400CCHCutPro 120-400CCHCutPro 144-400
Cleat Puller Specification
Conveyer length60″60″72″72″96″120″144″
Conveyor width available in: 10″ 10″ 10″ 10″ 10″ 10″ 10″
Contact Area for 10″60″ L x 10″ W60″ L x 10″ W72″ L x 10″ W72″ L x 10″ W96″ L x 10″ W120″ L x 10″ W144″ L x 10″ W
Max. Conveyor Opening6″6″6″6″6″6″6″
Fixed Bottom ConveyerYesYesYesYesYesYesYes
Upper beam Pneumatic ClampingYesYesYesYesYesYesYes
Adjustable entrance guide rollersYesYesYesYesYesYesYes
Chain drive systemYesYesYesYesYesYesYes
Quick Change CleatsYesYesYesYesYesYesYes
50′ remote controlYesYesYesYesYesYesYes
Vector motor/drive control systemYesYesYesYesYesYesYes
Digital speed displayYesYesYesYesYesYesYes
10 turn Potentiometer speed adjustmentYesYesYesYesYesYesYes
Master/Follower seclector switchYesYesYesYesYesYesYes
Cutpro Specification
Cut Window4.5″ x 8″6.5″ x 13″4.5″ x 8″6.5″ x 13″6.5″ x 13″6.5″ x 13″6.5″ x 13″
Heated BladeYesYesYesYesYesYesYes
Brake motor for quick blade stopYesYesYesYesYesYesYes
Cut length accuracy +/- .125 inchYesYesYesYesYesYesYes
Quick Change Clamp CleatYesYesYesYesYesYesYes
Integrated Electronic Length Control with encoderYesYesYesYesYesYesYes
Batch CountYesYesYesYesYesYesYes
Programmable recipiesYesYesYesYesYesYesYes
Easy choice of cut length on Touch ScreenYesYesYesYesYesYesYes
Hot Blade Control via Touch ScreenYesYesYesYesYesYesYes
Robust frame provides additional stability and supportYesYesYesYesYesYesYes
Fully inclosed safety cageYesYesYesYesYesYesYes
Longer safety tunels at entrace and exitYesYesYesYesYesYesYes
Commun Options
Line direction:
Right to LeftYesYesYesYesYesYesYes
Left to RigthYesYesYesYesYesYesYes
Safety Options :
CSA – UL InspectionOpt.Opt.Opt.Opt.Opt.Opt.Opt.
Safety enclosureYesYesYesYesYesYesYes
Electrics:
230-460-575V AC / 3PH /  60 Hz, 380-400V AC / 3PH / 50 HzYesYesYesYesYesYesYes
Puller Options
 Remote control Option:
75′ remote controlOpt.Opt.Opt.Opt.Opt.Opt.Opt.
100′ remote controlOpt.Opt.Opt.Opt.Opt.Opt.Opt.
Motor control Option:
Inverter motor/drive control systemOpt.Opt.Opt.Opt.Opt.Opt.Opt.
Servo motor/drive control system includes touch screenOpt.Opt.Opt.Opt.Opt.Opt.Opt.
Servo direct drive (2 motors, 2 drives, 2 gear boxes) control system includes touch screenOpt.Opt.Opt.Opt.Opt.Opt.Opt.
Other options:
Dual configuration application on common base or stager depending on Y-block configurationOpt.Opt.Opt.Opt.Opt.Opt.Opt.
Touch screen operational control (not servo)Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Footage counter options:
Mechanical Footage CounterOpt.Opt.Opt.Opt.Opt.Opt.Opt.
Digital Footage CounterOpt.Opt.Opt.Opt.Opt.Opt.Opt.
Length CounterOpt.Opt.Opt.Opt.Opt.Opt.Opt.
Patriot GAP IndicatorOpt.Opt.Opt.Opt.Opt.Opt.Opt.
CustomizableYesYesYesYesYesYesYes
CutPro Options
Length controller Options :
Electronic Length Control Dual presetOpt.Opt.Opt.Opt.Opt.Opt.Opt.
Multifonctional PLC Length ControlOpt.Opt.Opt.Opt.Opt.Opt.Opt.
Mechanical footage counter in Feet/MetersOpt.Opt.Opt.Opt.Opt.Opt.Opt.
Other Options:
Dual configuration application on common base or stager depending on Y-block configurationOpt.Opt.Opt.Opt.Opt.Opt.Opt.
Servo Control Table TravelOpt.Opt.Opt.Opt.Opt.Opt.Opt.
CustomizableYesYesYesYesYesYesYes

Combination Cleat Puller/Traveling Servo Hot Knife Specifications (CCHSCutPro Series)

Standard FeaturesCCHSCutPro 60-200CCHSCutPro 60-400CCHSCutPro 72-200CCHSCutPro 72-400CCHSCutPro 96-400CCHSCutPro 120-400CCHSCutPro 144-400
Cleat Puller Specification
Conveyer length60″60″72″72″96″120″144″
Conveyor width available in: 10″ 10″ 10″ 10″ 10″ 10″ 10″
Contact Area for 10″60″ L x 10″ W60″ L x 10″ W72″ L x 10″ W72″ L x 10″ W96″ L x 10″ W120″ L x 10″ W144″ L x 10″ W
Max. Conveyor Opening6″6″6″6″6″6″6″
Fixed Bottom ConveyerYesYesYesYesYesYesYes
Upper beam Pneumatic ClampingYesYesYesYesYesYesYes
Adjustable entrance guide rollersYesYesYesYesYesYesYes
Chain drive systemYesYesYesYesYesYesYes
Quick Change CleatsYesYesYesYesYesYesYes
50′ remote controlYesYesYesYesYesYesYes
Vector motor/drive control systemYesYesYesYesYesYesYes
Digital speed displayYesYesYesYesYesYesYes
10 turn Potentiometer speed adjustmentYesYesYesYesYesYesYes
Master/Follower seclector switchYesYesYesYesYesYesYes
Cutpro Specification
Cut Window4.5″ x 8″6.5″ x 13″4.5″ x 8″6.5″ x 13″6.5″ x 13″6.5″ x 13″6.5″ x 13″
Heated BladeYesYesYesYesYesYesYes
Brake motor for quick blade stopYesYesYesYesYesYesYes
Cut length accuracy +/- .015 inchYesYesYesYesYesYesYes
Quick Change Clamp CleatYesYesYesYesYesYesYes
Servo Comtrolled Table TravelYesYesYesYesYesYesYes
Integrated Electronic Length Control with encoderYesYesYesYesYesYesYes
Batch CountYesYesYesYesYesYesYes
Programmable recipiesYesYesYesYesYesYesYes
Easy choice of cut length on Touch ScreenYesYesYesYesYesYesYes
Hot Blade Control via Touch ScreenYesYesYesYesYesYesYes
Robust frame provides additional stability and supportYesYesYesYesYesYesYes
Fully inclosed safety cageYesYesYesYesYesYesYes
Longer safety tunels at entrace and exitYesYesYesYesYesYesYes
Commun Options
Line direction:
Right to LeftYesYesYesYesYesYesYes
Left to RigthYesYesYesYesYesYesYes
Safety Options :
CSA – UL InspectionOpt.Opt.Opt.Opt.Opt.Opt.Opt.
Safety enclosureYesYesYesYesYesYesYes
Electrics:
230-460-575V AC / 3PH /  60 Hz, 380-400V AC / 3PH / 50 HzYesYesYesYesYesYesYes
Puller Options
 Remote control Option:
75′ remote controlOpt.Opt.Opt.Opt.Opt.Opt.Opt.
100′ remote controlOpt.Opt.Opt.Opt.Opt.Opt.Opt.
Motor control Option:
Inverter motor/drive control systemOpt.Opt.Opt.Opt.Opt.Opt.Opt.
Servo motor/drive control system includes touch screenOpt.Opt.Opt.Opt.Opt.Opt.Opt.
Servo direct drive (2 motors, 2 drives, 2 gear boxes) control system includes touch screenOpt.Opt.Opt.Opt.Opt.Opt.Opt.
Other options:
Dual configuration application on common base or stager depending on Y-block configurationOpt.Opt.Opt.Opt.Opt.Opt.Opt.
Touch screen operational control (not servo)Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Footage counter options:
Mechanical Footage CounterOpt.Opt.Opt.Opt.Opt.Opt.Opt.
Digital Footage CounterOpt.Opt.Opt.Opt.Opt.Opt.Opt.
Length CounterOpt.Opt.Opt.Opt.Opt.Opt.Opt.
Patriot GAP IndicatorOpt.Opt.Opt.Opt.Opt.Opt.Opt.
CustomizableYesYesYesYesYesYesYes
CutPro Options
Length controller Options :
Electronic Length Control Dual presetOpt.Opt.Opt.Opt.Opt.Opt.Opt.
Multifonctional PLC Length ControlOpt.Opt.Opt.Opt.Opt.Opt.Opt.
Mechanical footage counter in Feet/MetersOpt.Opt.Opt.Opt.Opt.Opt.Opt.
Other Options:
Dual configuration application on common base or stager depending on Y-block configurationOpt.Opt.Opt.Opt.Opt.Opt.Opt.
CustomizableYesYesYesYesYesYesYes

Help & Resources