Pipes

Pipes

Pipes

PipeWhether your industry serves oil & gas, mining, building & construction, agriculture or irrigation, CDS pipe systems will exceed your expectations as our engineered options are endless. Our machinery can process extruded and co-extruded pipes from various materials including PVC, CPV, PE, HDPE and LDE.

Vacuum Sizing Tank Specifications (CVS Series)

Standard FeaturesCVS 8CVS 10CVS 12CVS 14CVS 16CVS 18CVS 20CVS 22CVS 24CVS 32
Tank Cross Section8″ x 8″10″ x 10″12″ x 12″14″ x 14″16″ x 16″18″ x 18″20″ x 20″22″ x 22″24″ x 24″32″ x 32″
Tank Length Available6′, 8′, 10′, 12′, 14′, 16′, 18′, 20′, and 24′6′, 8′, 10′, 12′, 14′, 16′, 18′, 20′, and 24′6′, 8′, 10′, 12′, 14′, 16′, 18′, 20′, and 24′6′, 8′, 10′, 12′, 14′, 16′, 18′, 20′, and 24′6′, 8′, 10′, 12′, 14′, 16′, 18′, 20′, and 24′6′, 8′, 10′, 12′, 14′, 16′, 18′, 20′, and 24′6′, 8′, 10′, 12′, 14′, 16′, 18′, 20′, and 24′6′, 8′, 10′, 12′, 14′, 16′, 18′, 20′, and 24′6′, 8′, 10′, 12′, 14′, 16′, 18′, 20′, and 24′6′, 8′, 10′, 12′, 14′, 16′, 18′, 20′, and 24′
Flood Vacuum SizingYesYesYesYesYesYesYesYesYesYes
Water Turbulance Bar with Spray ringYesYesYesYesYesYesYesYesYesYes
Hinged Clear-View CoversYesYesYesYesYesYesYesYesYesYes
Lockable Hinged Clear-View CoversOpt.Opt.Opt.Opt.Opt.YesYesYesYesYes
Adjustable Water LevelYesYesYesYesYesYesYesYesYesYes
Stainless steel Tank ConstructionYesYesYesYesYesYesYesYesYesYes
Heavy Duty Support FrameYesYesYesYesYesYesYesYesYesYes
Mounted on CastersYesYesYesYesYesYesYesYesYesYes
Pandulum Mounted Operator PanelYesYesYesYesYesYesYesYesYesYes
3-Axis Precision MovementYesYesYesYesYesYesYesYesYesYes
Line direction:
Right to LeftYesYesYesYesYesYesYesYesYesYes
Left to RigthYesYesYesYesYesYesYesYesYesYes
Safety Options :
CSA – UL InspectionOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Compartment Configurations:
Compartment Length Availables2′, 4′, 6′, 8′, 10′, 12′ and 14′2′, 4′, 6′, 8′, 10′, 12′ and 14′2′, 4′, 6′, 8′, 10′, 12′ and 14′2′, 4′, 6′, 8′, 10′, 12′ and 14′2′, 4′, 6′, 8′, 10′, 12′ and 14′2′, 4′, 6′, 8′, 10′, 12′ and 14′2′, 4′, 6′, 8′, 10′, 12′ and 14′2′, 4′, 6′, 8′, 10′, 12′ and 14′2′, 4′, 6′, 8′, 10′, 12′ and 14′2′, 4′, 6′, 8′, 10′, 12′ and 14′
Consult Factory for Customizable Comportments lengthsYesYesYesYesYesYesYesYesYesYes
Water Options:
Recirculation System (From 54GPM to 300GPM)Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Integrated Recirculation System (From 54GPM to 300GPM)Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Vaccum Pump (From 3HP, 5Hp, 7.5HP and 10HP)Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Evacuation Water Pump (From 20GPM to 50GPM)Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Plate and Frame Heat Exchanger (From 120, 000Btu/h to 800,000Btu/h)Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Stainless Steel Basket FilterOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Loop Control Heater SystemOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Temperature ControlOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Dual Stainless Steel Filter with BypassOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Shell and Tube Heat ExchangerOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Other options:
Stainless Steel FrameOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Tooling Vaccum Manifold 8 Outles per Vacuum pumpOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Tooling Water Manifold Entries 8 OutletsOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Tooling Water and Vauum Manifolds Monted through the Back WallOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Air Blower System Shop AirOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Air Blower System with Air BlowerOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Foam Insulation for water optionsOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Stainless Steel Shell Foam Insulation for water optionsOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Optional Touch Screen ControlOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Motorized Longitudinal MovementOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Motorized Longitudinal Movement with Floor TrackOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Hydraulic Longitudinal Mouvement with floor TrackOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Lockable Gas Assisted Hinged Clear-View CoversOpt.Opt.Opt.Opt.Opt.YesYesYesYesYes
Dual configuration application on common base or stager depending on Y-block configurationOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Electrics:
230-460-575V AC / 3PH /  60 Hz, 380-400V AC / 3PH / 50 HzYesYesYesYesYesYesYesYesYesYes
CustomizableYesYesYesYesYesYesYesYesYesYes

Vacuum Spray Sizing Tank Specifications  (CVSS Series)

Standard FeaturesCVSS 8CVSS 10CVSS 12CVSS 14CVSS 16CVSS 18CVSS 20CVSS 22CVSS 24CVSS 32
Tank Cross Section8″ x 8″10″ x 10″12″ x 12″14″ x 14″16″ x 16″18″ x 18″20″ x 20″22″ x 22″24″ x 24″32″ x 32″
Tank Length Available6′, 8′, 10′, 12′, 14′, 16′, 18′, 20′, and 24′6′, 8′, 10′, 12′, 14′, 16′, 18′, 20′, and 24′6′, 8′, 10′, 12′, 14′, 16′, 18′, 20′, and 24′6′, 8′, 10′, 12′, 14′, 16′, 18′, 20′, and 24′6′, 8′, 10′, 12′, 14′, 16′, 18′, 20′, and 24′6′, 8′, 10′, 12′, 14′, 16′, 18′, 20′, and 24′6′, 8′, 10′, 12′, 14′, 16′, 18′, 20′, and 24′6′, 8′, 10′, 12′, 14′, 16′, 18′, 20′, and 24′6′, 8′, 10′, 12′, 14′, 16′, 18′, 20′, and 24′6′, 8′, 10′, 12′, 14′, 16′, 18′, 20′, and 24′
Stainless Teel Spray BarsYesYesYesYesYesYesYesYesYesYes
Number of Spray Bars2244444666
Customizable Spray PatternYesYesYesYesYesYesYesYesYesYes
Entrance Spray ringYesYesYesYesYesYesYesYesYesYes
Hinged Clear-View CoversYesYesYesYesYesYesYesYesYesYes
Lockable Hinged Clear-View CoversOpt.Opt.Opt.Opt.Opt.YesYesYesYesYes
Stainless steel Tank ConstructionYesYesYesYesYesYesYesYesYesYes
Heavy Duty Support FrameYesYesYesYesYesYesYesYesYesYes
Mounted on CastersYesYesYesYesYesYesYesYesYesYes
Pandulum Mounted Operator PanelYesYesYesYesYesYesYesYesYesYes
3-Axis Precision MovementYesYesYesYesYesYesYesYesYesYes
Line direction:
Right to LeftYesYesYesYesYesYesYesYesYesYes
Left to RigthYesYesYesYesYesYesYesYesYesYes
Safety Options :
CSA – UL InspectionOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Compartment Configurations:
Compartment Length Availables2′, 4′, 6′, 8′, 10′, 12′ and 14′2′, 4′, 6′, 8′, 10′, 12′ and 14′2′, 4′, 6′, 8′, 10′, 12′ and 14′2′, 4′, 6′, 8′, 10′, 12′ and 14′2′, 4′, 6′, 8′, 10′, 12′ and 14′2′, 4′, 6′, 8′, 10′, 12′ and 14′2′, 4′, 6′, 8′, 10′, 12′ and 14′2′, 4′, 6′, 8′, 10′, 12′ and 14′2′, 4′, 6′, 8′, 10′, 12′ and 14′2′, 4′, 6′, 8′, 10′, 12′ and 14′
Adjustable Water LevelOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Spray or Flood Vacuum Sizing with Turbalence BarOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Consult Factory for Customizable Comportments lengthsYesYesYesYesYesYesYesYesYesYes
Water Options:
Recirculation System (From 54GPM to 300GPM)Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Integrated Recirculation System (From 54GPM to 300GPM)Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Vaccum Pump (From 3HP, 5Hp, 7.5HP and 10HP)Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Evacuation Water Pump (From 20GPM to 50GPM)Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Plate and Frame Heat Exchanger (From 120, 000Btu/h to 800,000Btu/h)Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Stainless Steel Basket FilterOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Loop Control Heater SystemOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Temperature ControlOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Dual Stainless Steel Filter with BypassOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Shell and Tube Heat ExchangerOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Other options:
Stainless Steel FrameOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Tooling Vaccum Manifold 8 Outles per Vacuum pumpOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Tooling Water Manifold Entries 8 OutletsOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Tooling Water and Vauum Manifolds Monted through the Back WallOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Air Blower System Shop AirOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Air Blower System with Air BlowerOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Foam Insulation for water optionsOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Stainless Steel Shell Foam Insulation for water optionsOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Optional Touch Screen ControlOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Motorized Longitudinal MovementOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Motorized Longitudinal Movement with Floor TrackOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Hydraulic Longitudinal Mouvement with floor TrackOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Lockable Gas Assisted Hinged Clear-View CoversOpt.Opt.Opt.Opt.Opt.YesYesYesYesYes
Dual configuration application on common base or stager depending on Y-block configurationOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Electrics:
230-460-575V AC / 3PH /  60 Hz, 380-400V AC / 3PH / 50 HzYesYesYesYesYesYesYesYesYesYes
CustomizableYesYesYesYesYesYesYesYesYesYes

Spray Tank Specifications  (CST Series)

Standard FeaturesCST 8CST 10CST 12CST 14CST 16CST 18CST 20CST 22CST 24CST 32CST 36CST 40
Tank Cross Section8″ x 8″10″ x 10″12″ x 12″14″ x 14″16″ x 16″18″ x 18″20″ x 20″22″ x 22″24″ x 24″32″ x 32″36″ x 36″40″ x 40″
Tank Length Available6′, 8′, 10′, 12′, 14′, 16′, 18′, 20′, 24′ and 30′6′, 8′, 10′, 12′, 14′, 16′, 18′, 20′, 24′ and 30′6′, 8′, 10′, 12′, 14′, 16′, 18′, 20′, 24′ and 30′6′, 8′, 10′, 12′, 14′, 16′, 18′, 20′, 24′ and 30′6′, 8′, 10′, 12′, 14′, 16′, 18′, 20′, 24′ and 30′6′, 8′, 10′, 12′, 14′, 16′, 18′, 20′, 24′ and 30′6′, 8′, 10′, 12′, 14′, 16′, 18′, 20′, 24′ and 30′6′, 8′, 10′, 12′, 14′, 16′, 18′, 20′, 24′ and 30′6′, 8′, 10′, 12′, 14′, 16′, 18′, 20′, 24′ and 30′6′, 8′, 10′, 12′, 14′, 16′, 18′, 20′, 24′ and 30′6′, 8′, 10′, 12′, 14′, 16′, 18′, 20′, 24′ and 30′6′, 8′, 10′, 12′, 14′, 16′, 18′, 20′, 24′ and 30′
Number of Spray Bars2244446668810
Customizable Spray PatternYesYesYesYesYesYesYesYesYesYesYesYes
Hinged Clear-View CoversYesYesYesYesYesYesYesYesYesYesYesYes
Lockable Hinged Clear-View CoversOpt.Opt.Opt.Opt.Opt.YesYesYesYesYesYesYes
Stainless steel Tank ConstructionYesYesYesYesYesYesYesYesYesYesYesYes
Heavy Duty Support FrameYesYesYesYesYesYesYesYesYesYesYesYes
Mounted on CastersYesYesYesYesYesYesYesYesYes
Pandulum Mounted Operator PanelYesYesYesYesYesYesYesYesYesYesYesYes
3-Axis Precision MovementYesYesYesYesYesYesYesYesYes
Line direction:
Right to LeftYesYesYesYesYesYesYesYesYesYesYesYes
Left to RigthYesYesYesYesYesYesYesYesYesYesYesYes
Safety Options :
CSA – UL InspectionOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Water Options:
Recirculation System (From 54GPM to 300GPM)Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Integrated Recirculation System (From 54GPM to 300GPM)Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Vaccum Pump (From 3HP, 5Hp, 7.5HP and 10HP)Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Evacuation Water Pump (From 20GPM to 50GPM)Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Plate and Frame Heat Exchanger (From 120, 000Btu/h to 800,000Btu/h)Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Stainless Steel Basket FilterOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Loop Control Heater SystemOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Temperature ControlOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Dual Stainless Steel Filter with BypassOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Shell and Tube Heat ExchangerOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Other options:
Stainless Steel FrameOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Air Blower System Shop AirOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Air Blower System with Air BlowerOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Foam Insulation for water optionsOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Stainless Steel Shell Foam Insulation for water optionsOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Optional Touch Screen ControlOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Motorized Longitudinal MovementOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Motorized Longitudinal Movement with Floor TrackOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Hydraulic Longitudinal Mouvement with floor TrackOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Lockable Gas Assisted Hinged Clear-View CoversOpt.Opt.Opt.Opt.Opt.YesYesYesYesYesYesYes
Dual configuration application on common base or stager depending on Y-block configurationOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Electrics:
230-460-575V AC / 3PH /  60 Hz, 380-400V AC / 3PH / 50 HzYesYesYesYesYesYesYesYesYesYesYesYes
CustomizableYesYesYesYesYesYesYesYesYesYesYesYes

Water Tank Specifications  (CWT Series)

Standard FeaturesCWT 4CWT 6CWT 8CWT 10CWT 12CWT 14CWT 16CWT 18CWT 20CWT 24
Tank Cross Section4″ x 4″6″ x 6″8″ x 8″10″ x 10″12″ x 12″14″ x 14″16″ x 16″18″ x 18″20″ x 20″24″ x 24″
Tank Length Available10′, 12′, 14′, 16′, 18′, 20′, 24′ and 30′10′, 12′, 14′, 16′, 18′, 20′, 24′ and 30′10′, 12′, 14′, 16′, 18′, 20′, 24′ and 30′10′, 12′, 14′, 16′, 18′, 20′, 24′ and 30′10′, 12′, 14′, 16′, 18′, 20′, 24′ and 30′10′, 12′, 14′, 16′, 18′, 20′, 24′ and 30′10′, 12′, 14′, 16′, 18′, 20′, 24′ and 30′10′, 12′, 14′, 16′, 18′, 20′, 24′ and 30′10′, 12′, 14′, 16′, 18′, 20′, 24′ and 30′10′, 12′, 14′, 16′, 18′, 20′, 24′ and 30′
Water Turbulance BarYesYesYesYesYesYesYesYesYesYes
Stainless steel Tank ConstructionYesYesYesYesYesYesYesYesYesYes
Heavy Duty Support FrameYesYesYesYesYesYesYesYesYesYes
Mounted on CastersYesYesYesYesYesYesYesYesYesYes
Pandulum Mounted Operator PanelYesYesYesYesYesYesYesYesYesYes
3-Axis Precision MovementYesYesYesYesYesYesYesYesYesYes
Line direction:
Right to LeftYesYesYesYesYesYesYesYesYesYes
Left to RigthYesYesYesYesYesYesYesYesYesYes
Safety Options :
CSA – UL InspectionOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Water Options:
Recirculation System (From 54GPM to 300GPM)Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Vaccum Pump (From 3HP, 5Hp, 7.5HP and 10HP)Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Plate and Frame Heat Exchanger (From 120, 000Btu/h to 800,000Btu/h)Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Stainless Steel Basket FilterOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Loop Control Heater SystemOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Temperature ControlOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Dual Stainless Steel Filter with BypassOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Shell and Tube Heat ExchangerOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Other options:
Stainless Steel FrameOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Tooling Vaccum Manifold 8 Outles per Vacuum pumpOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Tooling Water Manifold Entries 8 OutletsOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Tooling Water and Vauum Manifolds Monted through the Back WallOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Air Blower System Shop AirOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Air Blower System with Air BlowerOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Foam Insulation for water optionsOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Stainless Steel Shell Foam Insulation for water optionsOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Optional Touch Screen ControlOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Motorized Longitudinal MovementOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Motorized Longitudinal Movement with Floor TrackOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Hydraulic Longitudinal Mouvement with floor TrackOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Dual configuration application on common base or stager depending on Y-block configurationOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Electrics:
230-460-575V AC / 3PH /  60 Hz, 380-400V AC / 3PH / 50 HzYesYesYesYesYesYesYesYesYesYes
CustomizableYesYesYesYesYesYesYesYesYesYes

Pipe Haul-Off Specifications (CCH Series) – with V-Cleats

Standard FeaturesCCH 36CCH 40CCH 48
Conveyer length36″40″48″
Conveyor width3.5″3.5″3.5″
Contact Area40″ L x 3.5″ W40″ L x 3.5″ W48″ L x 3.5″ W
Pipe Capacity O.D.1/4″ to 4″1/4″ to 4″1/4″ to 4″
Max. Conveyor Opening5″5″5″
Upper beam Pneumatic ClampingYesYesYes
Lower beam Manual Heigth AdjustmentYesYesYes
Adjustable entrance guide rollersYesYesYes
Chain drive systemYesYesYes
Vector motor/drive control systemYesYesYes
Digital speed displayYesYesYes
10 turn Potentiometer speed adjustmentYesYesYes
Master/Follower seclector switchYesYesYes
Line direction:
Right to LeftYesYesYes
Left to RigthYesYesYes
Safety Options :
Safety enclosureOpt.Opt.Opt.
CSA – UL InspectionOpt.Opt.Opt.
Clamping Option:
Manual self-centering conveyor height adjustmentOpt.Opt.Opt.
 Remote control Option:
50′ remote controlOpt.Opt.Opt.
75′ remote controlOpt.Opt.Opt.
100′ remote controlOpt.Opt.Opt.
Motor control Option:
Inverter motor/drive control systemOpt.Opt.Opt.
Vector direct drive (motors, drives, gear boxes for each conveyor arm) control systemOpt.Opt.Opt.
Servo motor/drive control system includes touch screenOpt.Opt.Opt.
Servo direct drive (motors, drives, gear boxes for each conveyor arm) control system includes touch screenOpt.Opt.Opt.
Other options:
Pendulum-mounted upper beam with pneumatic clampingOpt.Opt.Opt.
Dual configuration application on common base or stager depending on Y-block configurationOpt.Opt.Opt.
Touch screen operational control (not servo)Opt.Opt.Opt.
Footage counter options:
Mechanical Footage CounterOpt.Opt.Opt.
Digital Footage CounterOpt.Opt.Opt.
Length CounterOpt.Opt.Opt.
Patriot GAP IndicatorOpt.Opt.Opt.
Electrics:
230-460-575V AC / 3PH /  60 Hz, 380-400V AC / 3PH / 50 HzYesYesYes
CustomizableYesYesYes

Pipe Haul-Off Specifications (CPH Series) – with V-Cleat

Standard FeaturesCPH 240CPH 260CPH 440CPH 460CPH 660CPH 872CPH 1072CPH 1084CPH 1284CPH 1484
Conveyer length40″60″40″60″60″72″72″84″84″84″
Conveyor width3.5″3.5″3.5″3.5″4″4″4″4″4″4″
Number of Conveyor Arms22446810101214
Contact Area40″ L x 3.5″ W60″ L x 3.5″ W40″ L x 3.5″ W60″ L x 3.5″ W60″ L x 4″ W72″ L x 4″ W72″ L x 4″ W84″ L x 4″ W84″ L x 4″ W84″ L x 4″ W
Pipe Capacity O.D.1/2″ to 4″1/2″ to 6″1/4″ to 6″1/2″ to 16″6″ to 24″18″ to 40″ Up to 48″ Up to 48″Up to 54″Up to 60″
Self-Centering Beam AdjustmentYesYesOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Bottom conveyor manual adjustmentYesYesYesYesYesYesYesYes
Top conveyor(s) pneumatic clampingYesYesYesYesYesYesYesYesYesYes
Adjustable entrance guide rollersYesYesYesYesYesYesYesYesYesYes
Vector motor/drive control systemYesYesYesYesYesYesYesYesYesYes
Digital speed displayYesYesYesYesYesYesYesYesYesYes
10 turn Potentiometer speed adjustmentYesYesYesYesYesYesYesYesYesYes
Master/Follower seclector switchYesYesYesYesYesYesYesYesYesYes
Safety enclosureYesYesYesYesYesYesYesYesYesYes
Line direction:
Right to LeftYesYesYesYesYesYesYesYesYesYes
Left to RigthYesYesYesYesYesYesYesYesYesYes
Safety Options :
CSA – UL InspectionOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
 Remote control Option:
50′ remote controlOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
75′ remote controlOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
100′ remote controlOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Motor control Option:
Inverter motor/drive control systemOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Vector direct drive (motors, drives, gear boxes for each conveyor arm) control systemOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Servo motor/drive control system includes touch screenOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Servo direct drive (motors, drives, gear boxes for each conveyor arm) control system includes touch screenOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Other options:
Dual configuration application on common base or stager depending on Y-block configurationOpt.Opt.
Touch screen operational control (not servo)Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Motorized bottom beam heigth adjustmentOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Footage counter options:
Mechanical Footage CounterOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Digital Footage CounterOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Length CounterOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Patriot GAP IndicatorOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Electrics:
230-460-575V AC / 3PH /  60 Hz, 380-400V AC / 3PH / 50 HzYesYesYesYesYesYesYesYesYesYes
CustomizableYesYesYesYesYesYesYesYesYesYes

Servo Rotary Fly-Knife Cutter Specifications (CSRK Series)

Standard FeaturesCSRK 45CSRK 65CSRK 8
Cutting Window4.25″ OD6.25″ OD8.25″ OD
Cuts-per-minute in start/stop modeNeed InfoNeed InfoNeed Info
Cuts-per-minute in constant cut modeNeed InfoNeed infoNeed Info
Bushing Diameter4.5″ OD6.5″ OD8.5″ OD
Maximum Cut length999,999.99″999,999.99″999,999.99″
Cut length accuracy +/- .062 inchYesYesYes
Integrated Electronic Length Control with encoderYesYesYes
Batch CountYesYesYes
Programmable recipiesYesYesYes
Easy choice of cut length on Touch ScreenYesYesYes
Robust frame provides additional stability and supportYesYesYes
Longer safety tunels at entrace and exitYesYesYes
Line direction:
Right to LeftYesYesYes
Left to RigthYesYesYes
Length controller Options :
Multifonctional PLC Length ControlOpt.Opt.Opt.
Mechanical footage counter in Feet/MetersOpt.Opt.Opt.
Safety Options :
CSA – UL InspectionOpt.Opt.Opt.
Other Options:
Optional blade lubrification mistOpt.Opt.Opt.
Optional blade lubrification with bottle and blade wipeOpt.Opt.Opt.
Optional blade heater systemOpt.Opt.Opt.
Stainless steel cutter bushingOpt.Opt.Opt.
Stainless steel cutter headOpt.Opt.Opt.
Dual configuration application on common base or stager depending on Y-block configurationOpt.Opt.Opt.
Planetary gearbox for extra cutting torque model changed to HTYesYesYes
Electrics:
230-460-575V AC / 3PH / 60 Hz, 380-400V AC / 3PH / 50 HzYesYesYes
CustomizableYesYesYes

Traveling Saws Specifications (CTS Series)

Standard FeaturesCTS 3-3CTS 45-8CTS 55CTS 65-13CTS 85-18CTS 11-24CTS 13-28
Cut Window Profile3″ x 3″4.5″ x 85″ x  5″6.5″ x 13″8.5″ x 18″11″ x 24″13″ x 28″
Cut Window Pipe3″OD4.5″ OD5″ OD6.5″ OD8.5″ OD11″ OD13″ OD
Carbide Tipped Saw Blade Diameter10″14″16″18″24″28″33″
Brake motor for quick blade stopYesYesYesYesYesYes
Robust frame provides additional stability and supportYesYesYes
Line direction:
Right to LeftYesYesYesYesYesYesYes
Left to RigthYesYesYesYesYesYesYes
Length controller Options :
Electronic Length ControlOpt.Opt.Opt.Opt.Opt.Opt.Opt.
Electronic Length Control Dual presetOpt.Opt.Opt.Opt.Opt.Opt.Opt.
Multifonctional PLC Length ControlOpt.Opt.Opt.Opt.Opt.Opt.Opt.
Mechanical footage counter in Feet/MetersOpt.Opt.Opt.Opt.Opt.Opt.Opt.
Dust Collection Options:
Vacuum Dust/Chip collector CVF1Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Vacuum Dust/Chip collector CVF2Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Vacuum Dust/Chip collector CKVF3Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Vacuum Dust/Chip collector CKVF5Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Safety Options :
Full inclosed safety cageOpt.Opt.Opt.Opt.Opt.Opt.Opt.
Longer safety tunels at entrace and exitOpt.Opt.Opt.Opt.Opt.Opt.Opt.
CSA – UL InspectionOpt.Opt.Opt.Opt.Opt.Opt.Opt.
Other Options:
Variable saw speedOpt.Opt.Opt.Opt.Opt.Opt.Opt.
Dual configuration application on common base or stager depending on Y-block configurationOpt.Opt.Opt.Opt.Opt.Opt.Opt.
Air Blow-off for dust on productOpt.Opt.Opt.Opt.Opt.Opt.Opt.
Touch screen operational control (not servo)Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Soft Start and soft stop for blade rotationOpt.Opt.Opt.
Electrics:
230-460-575V AC / 3PH / 60 Hz, 380-400V AC / 3PH / 50 HzYesYesYesYesYesYesYes
CustomizableYesYesYesYesYesYesYes

Servo Traveling Saws Specifications (CSS Series)

Standard FeaturesCSS 3-3CSS 45-8CSS 55CSS 65-13CSS 85-18CSS 11-24
Cut Window Profile3″ x 3″4.5″ x 85″ x  5″6.5″ x 13″8.5″ x 18″11″ x 24″
Cut Window Pipe3″OD4.5″ OD5″ OD6.5″ OD8.5″ OD11″ OD
Carbide Tipped Saw Blade Diameter10″14″16″18″24″28″
Brake motor for quick blade stopYesYesYesYesYes
Cut length accuracy +/- .015 inchYesYesYesYesYesYes
Integrated Electronic Length Control with encoderYesYesYesYesYesYes
Batch CountYesYesYesYesYesYes
Programmable recipiesYesYesYesYesYesYes
Easy choice of cut length on Touch ScreenYesYesYesYesYesYes
Robust frame provides additional stability and supportYesYesYesYesYesYes
Vacuum Dust/Chip CollectorYesYesYesYesYesYes
Line direction:
Right to LeftYesYesYesYesYesYes
Left to RigthYesYesYesYesYesYes
Dust Collection Options:
Vacuum Dust/Chip collector CKVF3Opt.Opt.Opt.Opt.Opt.Opt.
Vacuum Dust/Chip collector CKVF5Opt.Opt.Opt.Opt.Opt.Opt.
Safety Options :
Full inclosed safety cageOpt.Opt.Opt.Opt.Opt.Opt.
Longer safety tunels at entrace and exitOpt.Opt.Opt.Opt.Opt.Opt.
CSA – UL InspectionOpt.Opt.Opt.Opt.Opt.Opt.
Other Options:
Variable saw speedOpt.Opt.Opt.Opt.Opt.Opt.
Dual configuration application on common base or stager depending on Y-block configurationOpt.Opt.Opt.Opt.Opt.Opt.
Air Blow-off for dust on productOpt.Opt.Opt.Opt.Opt.Opt.
Soft Start and soft stop for blade rotationOpt.Opt.
Enhanced traveling length for high velocity line Model changes to CSSH SeriesOpt.Opt.Opt.Opt.Opt.Opt.
Electrics:
230-460-575V AC / 3PH / 60 Hz, 380-400V AC / 3PH / 50 HzYesYesYesYesYesYes
CustomizableYesYesYesYesYesYes

Traveling Down-cut Saws Specifications (CTSD Series)

Standard FeaturesCTSD 3-3CTSD 45-8CTSD 65-13CTSD 85-18
Cut Window Profile3″ x 3″4.5″ x 86.5″ x 13″8.5″ x 18″
Cut Window Pipe3″OD4.5″ OD6.5″ OD8.5″ OD
Carbide Tipped Saw Blade Diameter10″14″18″24″
Brake motor for quick blade stopYesYesYes
Blade Cuts from the Top (Balde travel: from the top-down)YesYesYesYes
Robust frame provides additional stability and supportYesYesYesYes
Line direction:
Right to LeftYesYesYesYes
Left to RigthYesYesYesYes
Length controller Options :
Electronic Length ControlOpt.Opt.Opt.Opt.
Electronic Length Control Dual presetOpt.Opt.Opt.Opt.
Multifonctional PLC Length ControlOpt.Opt.Opt.Opt.
Mechanical footage counter in Feet/MetersOpt.Opt.Opt.Opt.
Dust Collection Options:
Vacuum Dust/Chip collector CVF1Opt.Opt.Opt.Opt.
Vacuum Dust/Chip collector CVF2Opt.Opt.Opt.Opt.
Vacuum Dust/Chip collector CKVF3Opt.Opt.Opt.Opt.
Vacuum Dust/Chip collector CKVF5Opt.Opt.Opt.Opt.
Safety Options :
Full inclosed safety cageOpt.Opt.Opt.Opt.
Longer safety tunels at entrace and exitOpt.Opt.Opt.Opt.
CSA – UL InspectionOpt.Opt.Opt.Opt.
Other Options:
Variable saw speedOpt.Opt.Opt.Opt.
Dual configuration application on common base or stager depending on Y-block configurationOpt.Opt.Opt.Opt.
Air Blow-off for dust on productOpt.Opt.Opt.Opt.
Touch screen operational control (not servo)Opt.Opt.Opt.Opt.
Soft Start and soft stop for blade rotationOpt.
Electrics:
230-460-575V AC / 3PH /  60 Hz, 380-400V AC / 3PH / 50 HzYesYesYesYes
CustomizableYesYesYesYes

Servo Traveling Down-Cut Saws Specifications (CSSD Series)

Standard FeaturesCSSD 3-3CSSD 45-8CSS 65-13CSS 85-18
Cut Window Profile3″ x 3″4.5″ x 86.5″ x 13″8.5″ x 18″
Cut Window Pipe3″OD4.5″ OD6.5″ OD8.5″ OD
Carbide Tipped Saw Blade Diameter10″14″18″24″
Brake motor for quick blade stopYesYesYes
Cut length accuracy +/- .020 inchYesYesYesYes
Integrated Electronic Length Control with encoderYesYesYesYes
Batch CountYesYesYesYes
Programmable recipiesYesYesYesYes
Easy choice of cut length on Touch ScreenYesYesYesYes
Blade Cuts from the Top (Balde travel: from the top-down)YesYesYesYes
Robust frame provides additional stability and supportYesYesYesYes
Vacuum Dust/Chip CollectorYesYesYesYes
Line direction:
Right to LeftYesYesYesYes
Left to RigthYesYesYesYes
Dust Collection Options:
Vacuum Dust/Chip collector CKVF3Opt.Opt.Opt.Opt.
Vacuum Dust/Chip collector CKVF5Opt.Opt.Opt.Opt.
Safety Options :
Full inclosed safety cageOpt.Opt.Opt.Opt.
Longer safety tunels at entrace and exitOpt.Opt.Opt.Opt.
CSA – UL InspectionOpt.Opt.Opt.Opt.
Other Options:
Variable saw speedOpt.Opt.Opt.Opt.
Dual configuration application on common base or stager depending on Y-block configurationOpt.Opt.Opt.Opt.
Air Blow-off for dust on productOpt.Opt.Opt.Opt.
Soft Start and soft stop for blade rotationOpt.
Enhanced traveling length for high velocity line Model changes to CSSDH SeriesOpt.Opt.Opt.Opt.
Electrics:
230-460-575V AC / 3PH /  60 Hz, 380-400V AC / 3PH / 50 HzYesYesYesYes
CustomizableYesYesYesYes

Traveling Planetary Saw Specification (CTPS Series)

Standard FeaturesCTPS 3-12CTPS 3-16CTPS 6-18CTPS 8-24CTPS 10-36CTPS 24-48
Cutting Capacity3″ to 12″OD3″ to 16″OD6″ to 18″OD8″ to 24″OD10″ to 36″OD24″ to 48″OD
Saw Blade Diameter6″8″8″10″12″12″
Integrated Electronic Length Control with encoder via Touch ScreenYesYesYesYesYesYes
Batch CountYesYesYesYesYesYes
Programmable recipiesYesYesYesYesYesYes
Easy choice of cut length on Touch ScreenYesYesYesYesYesYes
Robust frame provides additional stability and supportYesYesYesYesYesYes
Carriage travel with Pneumatic assitYesYesYesYesYesYes
Safety EnclosureYesYesYesYesYesYes
Line direction:
Right to LeftYesYesYesYesYesYes
Left to RigthYesYesYesYesYesYes
Dust Collection Options:
Vacuum Dust/Chip collector CKVF3Opt.Opt.Opt.Opt.Opt.Opt.
Vacuum Dust/Chip collector CKVF5Opt.Opt.Opt.Opt.Opt.Opt.
Safety Options :
CSA – UL InspectionOpt.Opt.Opt.Opt.Opt.Opt.
Other Options:
Chamfer Kit – includes Oversized Blade Motor and Angeled Chamfering ToolOpt.Opt.Opt.Opt.Opt.Opt.
Variable saw speedOpt.Opt.Opt.Opt.Opt.Opt.
Enhanced traveling length for high velocity lineOpt.Opt.Opt.Opt.Opt.Opt.
Electrics:
230-460-575V AC / 3PH /  60 Hz, 380-400V AC / 3PH / 50 HzYesYesYesYesYesYes
CustomizableYesYesYesYesYesYes

Traveling Planetary SawFarless Cutter Specification (CPSC Series)

Standard FeaturesCTPS 3-12CTPS 3-16CTPS 6-18CTPS 8-24CTPS 10-36CTPS 24-48
Cutting Capacity3″ to 12″OD3″ to 16″OD6″ to 18″OD8″ to 24″OD10″ to 36″OD24″ to 48″OD
Cutting Disc ToolYesYesYesYesYesYes
Adjustable Cutting Disc PenetrationYesYesYesYesYesYes
Chipless/Swaferless CuttingYesYesYesYesYesYes
Adjustable Carriage RotationYesYesYesYesYesYes
Integrated Electronic Length Control with encoder via Touch ScreenYesYesYesYesYesYes
Batch CountYesYesYesYesYesYes
Programmable recipiesYesYesYesYesYesYes
Easy choice of cut length on Touch ScreenYesYesYesYesYesYes
Robust frame provides additional stability and supportYesYesYesYesYesYes
Carriage travel with Pneumatic assitYesYesYesYesYesYes
Safety EnclosureYesYesYesYesYesYes
Line direction:
Right to LeftYesYesYesYesYesYes
Left to RigthYesYesYesYesYesYes
Safety Options :
CSA – UL InspectionOpt.Opt.Opt.Opt.Opt.Opt.
Other Options:
Enhanced traveling length for high velocity lineOpt.Opt.Opt.Opt.Opt.Opt.
Electrics:
230-460-575V AC / 3PH /  60 Hz, 380-400V AC / 3PH / 50 HzYesYesYesYesYesYes
CustomizableYesYesYesYesYesYes

Tilt Table for Pipe Specifications (CTTP and CRTP Series)

Standard FeaturesCTTP 6CTTP 8CTTP 12CRTP 6CRTP 8CRTP 12CRTP 24
Tilt Table length10′ , 12′, 16′, 18′ and 20′10′, 12′, 16′, 18′ and 20′10′, 12′, 16′, 18′ and 20′ 20′ 20′ 20′ 20′
V-Table with rollers width6″6″8″8″
Tilt Table width6″8″12″
Table size with 10′ length6″ W x 10′ L8″ W x 10′ L12″ W x 10′ L
Table size with 12′ length6″ W x 12′ L8″ W x 12′ L12″ W x 12′ L
Table size with 16′ length6″ W x 16′ L8″ W x 16′ L12″ W x 16′ L
Table size with 18′ length6″ W x 18′ L8″ W x 18′ L12″ W x 18′ L
Table size with 20′ length6″ W x 20′ L8″ W x 20′ L12″ W x 20′ LV-6″ W x 20′ LV-6″ W x 20′ LV-8″ W x 20′ LV-8″ W x 20′ L
V Shaped TablesYesYesYesYesYesYesYes
Programmable Pneumatic TiltingYesYesYes
Stainless steel tableYesYesYesOpt.Opt.Opt.Opt.
Collection RackYesYesYesYesYesYesYes
Line direction:
Right to LeftYesYesYesYesYesYesYes
Left to RigthYesYesYesYesYesYesYes
Safety Options :
CSA – UL InspectionOpt.Opt.Opt.
Other options:
Anti-scratch coating on collection rackOpt.Opt.Opt.
Product basketOpt.Opt.Opt.
Batch CounterOpt.Opt.Opt.
Two Sided DumpingOpt.Opt.Opt.
Product RejectionOpt.Opt.Opt.
Dual configuration application on common base or stager depending on Y-block configurationOpt.Opt.Opt.
Electrics:
120V/220V AC / 1PH /  50/60 HzYesYesYes
CustomizableYesYesYes

Help & Resources