Rubber

Rubber

CDS’s ability to offer machinery capable of producing end product coming from plastic alternatives such as rubber demonstrate our promise to offer customized products. Rubber offers a wide range of possibilities and our expertise is able to accommodate a various range of custom profiles such as connectors, expansion joints, gaskets, hoses, protectors, seals, trims and many more.

Rubber1 Rubber2

Spray Tank Specifications  (CST Series)

CST 10CST 12CST 14CST 16CST 18CST 20CST 22CST 24CST 32CST 36CST 40
10″ x 10″12″ x 12″14″ x 14″16″ x 16″18″ x 18″20″ x 20″22″ x 22″24″ x 24″32″ x 32″36″ x 36″40″ x 40″
6′, 8′, 10′, 12′, 14′, 16′, 18′, 20′, 24′ and 30′6′, 8′, 10′, 12′, 14′, 16′, 18′, 20′, 24′ and 30′6′, 8′, 10′, 12′, 14′, 16′, 18′, 20′, 24′ and 30′6′, 8′, 10′, 12′, 14′, 16′, 18′, 20′, 24′ and 30′6′, 8′, 10′, 12′, 14′, 16′, 18′, 20′, 24′ and 30′6′, 8′, 10′, 12′, 14′, 16′, 18′, 20′, 24′ and 30′6′, 8′, 10′, 12′, 14′, 16′, 18′, 20′, 24′ and 30′6′, 8′, 10′, 12′, 14′, 16′, 18′, 20′, 24′ and 30′6′, 8′, 10′, 12′, 14′, 16′, 18′, 20′, 24′ and 30′6′, 8′, 10′, 12′, 14′, 16′, 18′, 20′, 24′ and 30′6′, 8′, 10′, 12′, 14′, 16′, 18′, 20′, 24′ and 30′
244446668810
YesYesYesYesYesYesYesYesYesYesYes
YesYesYesYesYesYesYesYesYesYesYes
Opt.Opt.Opt.Opt.YesYesYesYesYesYesYes
YesYesYesYesYesYesYesYesYesYesYes
YesYesYesYesYesYesYesYesYesYesYes
YesYesYesYesYesYesYesYes
YesYesYesYesYesYesYesYesYesYesYes
YesYesYesYesYesYesYesYes
YesYesYesYesYesYesYesYesYesYesYes
YesYesYesYesYesYesYesYesYesYesYes
Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Opt.Opt.Opt.Opt.YesYesYesYesYesYesYes
Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
YesYesYesYesYesYesYesYesYesYesYes
YesYesYesYesYesYesYesYesYesYesYes

Water Tank Specifications  (CWT Series)

Standard FeaturesCWT 4CWT 6CWT 8CWT 10CWT 12CWT 14CWT 16CWT 18CWT 20CWT 24
Tank Cross Section4″ x 4″6″ x 6″8″ x 8″10″ x 10″12″ x 12″14″ x 14″16″ x 16″18″ x 18″20″ x 20″24″ x 24″
Tank Length Available10′, 12′, 14′, 16′, 18′, 20′, 24′ and 30′10′, 12′, 14′, 16′, 18′, 20′, 24′ and 30′10′, 12′, 14′, 16′, 18′, 20′, 24′ and 30′10′, 12′, 14′, 16′, 18′, 20′, 24′ and 30′10′, 12′, 14′, 16′, 18′, 20′, 24′ and 30′10′, 12′, 14′, 16′, 18′, 20′, 24′ and 30′10′, 12′, 14′, 16′, 18′, 20′, 24′ and 30′10′, 12′, 14′, 16′, 18′, 20′, 24′ and 30′10′, 12′, 14′, 16′, 18′, 20′, 24′ and 30′10′, 12′, 14′, 16′, 18′, 20′, 24′ and 30′
Water Turbulance BarYesYesYesYesYesYesYesYesYesYes
Stainless steel Tank ConstructionYesYesYesYesYesYesYesYesYesYes
Heavy Duty Support FrameYesYesYesYesYesYesYesYesYesYes
Mounted on CastersYesYesYesYesYesYesYesYesYesYes
Pandulum Mounted Operator PanelYesYesYesYesYesYesYesYesYesYes
3-Axis Precision MovementYesYesYesYesYesYesYesYesYesYes
Line direction:
Right to LeftYesYesYesYesYesYesYesYesYesYes
Left to RigthYesYesYesYesYesYesYesYesYesYes
Safety Options :
CSA – UL InspectionOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Water Options:
Recirculation System (From 54GPM to 300GPM)Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Vaccum Pump (From 3HP, 5Hp, 7.5HP and 10HP)Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Plate and Frame Heat Exchanger (From 120, 000Btu/h to 800,000Btu/h)Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Stainless Steel Basket FilterOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Loop Control Heater SystemOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Temperature ControlOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Dual Stainless Steel Filter with BypassOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Shell and Tube Heat ExchangerOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Other options:
Stainless Steel FrameOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Tooling Vaccum Manifold 8 Outles per Vacuum pumpOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Tooling Water Manifold Entries 8 OutletsOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Tooling Water and Vauum Manifolds Monted through the Back WallOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Air Blower System Shop AirOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Air Blower System with Air BlowerOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Foam Insulation for water optionsOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Stainless Steel Shell Foam Insulation for water optionsOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Optional Touch Screen ControlOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Motorized Longitudinal MovementOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Motorized Longitudinal Movement with Floor TrackOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Hydraulic Longitudinal Mouvement with floor TrackOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Dual configuration application on common base or stager depending on Y-block configurationOpt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.Opt.
Electrics:
230-460-575V AC / 3PH / 60 Hz, 380-400V AC / 3PH / 50 HzYesYesYesYesYesYesYesYesYesYes
CustomizableYesYesYesYesYesYesYesYesYesYes

Belt Puller Specifications (CBH Series)

Standard FeaturesCBH 9.5CBH 11CBH 16CBH 18
Conveyer length9.5″11″16″18″
Conveyor width available in:2″, 3″ , 4″ and 6″2″, 3″ , 4″ and 6″2″, 3″ , 4″ and 6″2″, 3″ , 4″ and 6″
Contact Area for 2″9.5″ L x 2″ W11″ L x 2″ W16″ L x 2″ W18″ L x 2″ W
Contact Area for 3″9.5″ L x 3″ W11″ L x 3″ W16″ L x 3″ W18″ L x 3″ W
Contact Area for 4″9.5″ L x 4″ W11″ L x 4″ W16″ L x 4″ W18″ L x 4″ W
Contact Area for 6″9.5″ L x 6″ W11″ L x 6″ W16″ L x 6″ W18″ L x 6″ W
Max. Conveyor Opening3″3″3″3″
Manual self-centering conveyor heght adjustmentYesYesYesYes
Adjustable entrance guide rollersYesYesYesYes
timming belt drive systemYesYesYesYes
Duragrip Puregum beltsYesYesYesYes
Vector motor/drive control systemYesYesYesYes
Digital speed displayYesYesYesYes
10 turn Potentiometer speed adjustmentYesYesYesYes
Master/Follower seclector switchYesYesYesYes
Line direction:
Right to LeftYesYesYesYes
Left to RigthYesYesYesYes
Safety Options :
Safety enclosureOpt.Opt.Opt.Opt.
CSA – UL InspectionOpt.Opt.Opt.Opt.
Clamping Option:
Upper beam Pneumatic ClampingOpt.Opt.Opt.Opt.
Bottom conveyor fixed/adjustable top conveyorOpt.Opt.Opt.Opt.
 Remote control Option:
50′ remote controlOpt.Opt.Opt.Opt.
75′ remote controlOpt.Opt.Opt.Opt.
100′ remote controlOpt.Opt.Opt.Opt.
Motor control Option:
Inverter motor/drive control systemOpt.Opt.Opt.Opt.
Vector direct drive (2 motors, 2 drives, 2 gear boxes) control systemOpt.Opt.Opt.Opt.
Servo motor/drive control system includes touch screenOpt.Opt.Opt.Opt.
Servo direct drive (2 motors, 2 drives, 2 gear boxes) control system includes touch screenOpt.Opt.Opt.Opt.
Belt option:
Natural rubberOpt.Opt.Opt.Opt.
FDA-compliantOpt.Opt.Opt.Opt.
Belt contourred to productOpt.Opt.Opt.Opt.
Footage counter options:
Mechanical Footage CounterOpt.Opt.Opt.Opt.
Digital Footage CounterOpt.Opt.Opt.Opt.
Length CounterOpt.Opt.Opt.Opt.
Patriot GAP IndicatorOpt.Opt.Opt.Opt.
Other options:
Dual configuration application on common base or stager depending on Y-block configurationOpt.Opt.Opt.Opt.
Touch screen operational control (not servo)Opt.Opt.Opt.Opt.
Electrics:
230-460-575V AC / 3PH / 60 Hz, 380-400V AC / 3PH / 50 HzYesYesYesYes
CustomizableYesYesYesYes

Belt Puller Specifications (CBH Series)

Standard FeaturesCBH 25CBH 36CBH 40CBH 48CBH 60
Conveyer length25″36″40″48″60″
Conveyor width available in:4″, 6″ , 8″, 12″ and 24″4″, 6″ , 8″, 12″ and 24″4″, 6″ , 8″, 12″ and 24″4″, 6″ , 8″, 12″ and 24″4″, 6″ , 8″, 12″ and 24″
Contact Area for 4″25″ L x 4″ W36″ L x 4″ W40″ L x 4″ W48″ L x 4″ W60″ L x 4″ W
Contact Area for 6″25″ L x 6″ W36″ L x 6″ W40″ L x 6″ W48″ L x 6″ W60″ L x 6″ W
Contact Area for 8″25″ L x 8″ W36″ L x 8″ W40″ L x 8″ W48″ L x 8″ W60″ L x 8″ W
Contact Area for 12″25″ L x 12″ W36″ L x 12″ W40″ L x 12″ W48″ L x 12″ W60″ L x 12″ W
Contact Area for 24″25″ L x 24″ W36″ L x 24″ W40″ L x 24″ W48″ L x 24″ W60″ L x 24″ W
Max. Conveyor Opening7″7″7″7″7″
Manual individual beam height adjustmentYesYesYesYesYes
Adjustable entrance guide rollersYesYesYesYesYes
Chain drive systemYesYesYesYesYes
Duragrip Puregum beltsYesYesYesYesYes
Vector motor/drive control systemYesYesYesYesYes
Digital speed displayYesYesYesYesYes
10 turn Potentiometer speed adjustmentYesYesYesYesYes
Master/Follower seclector switchYesYesYesYesYes
Line direction:
Right to LeftYesYesYesYesYes
Left to RigthYesYesYesYesYes
Safety Options :
Safety enclosureOpt.Opt.Opt.Opt.Opt.
CSA – UL InspectionOpt.Opt.Opt.Opt.Opt.
Clamping Option:
Upper beam Pneumatic ClampingOpt.Opt.Opt.Opt.Opt.
 Remote control Option:
50′ remote controlOpt.Opt.Opt.Opt.Opt.
75′ remote controlOpt.Opt.Opt.Opt.Opt.
100′ remote controlOpt.Opt.Opt.Opt.Opt.
Motor control Option:
Inverter motor/drive control systemOpt.Opt.Opt.Opt.Opt.
Vector direct drive (2 motors, 2 drives, 2 gear boxes) control systemOpt.Opt.Opt.Opt.Opt.
Servo motor/drive control system includes touch screenOpt.Opt.Opt.Opt.Opt.
Servo direct drive (2 motors, 2 drives, 2 gear boxes) control system includes touch screenOpt.Opt.Opt.Opt.Opt.
Belt option:
Natural rubberOpt.Opt.Opt.Opt.Opt.
FDA-compliantOpt.Opt.Opt.Opt.Opt.
Belt contourred to productOpt.Opt.Opt.Opt.Opt.
Footage counter options:
Mechanical Footage CounterOpt.Opt.Opt.Opt.Opt.
Digital Footage CounterOpt.Opt.Opt.Opt.Opt.
Length CounterOpt.Opt.Opt.Opt.Opt.
Patriot GAP IndicatorOpt.Opt.Opt.Opt.Opt.
Other options:
Dual configuration application on common base or stager depending on Y-block configurationOpt.Opt.Opt.Opt.Opt.
Manual self-centering conveyor heght adjustmentOpt.Opt.Opt.Opt.Opt.
Timming belt drive systemOpt.Opt.Opt.Opt.Opt.
Touch screen operational control (not servo)Opt.Opt.Opt.Opt.Opt.
Electrics:
230-460-575V AC / 3PH / 60 Hz, 380-400V AC / 3PH / 50 HzYesYesYesYesYes
CustomizableYesYesYesYesYes

Fly-Knife Cutter Specifications (CSharp Series)

Standard FeaturesC-Sharp 25C-Sharp 35C-Sharp 45
Cutting Window2.25″ OD3.25″ OD4.25″ OD
Cuts-per-minute in start/stop modeNeed InfoNeed InfoNeed Info
Cuts-per-minute in constant cut modeNeed InfoNeed infoNeed Info
Bushing Diameter2.5″ OD3.5″ OD4.5″ OD
Maximum Cut length19,999.99″19,999.99″19,999.99″
Longitudinal setting12″12″12″
Cut length accuracy +/- .030 inchYesYesYes
Integrated Electronic Length Control with encoderYesYesYes
Easy choice of cut length on Touch ScreenYesYesYes
Robust frame provides additional stability and supportYesYesYes
Longer safety tunels at entrace and exitYesYesYes
Line direction:
Right to LeftYesYesYes
Left to RigthYesYesYes
Length controller Options :
Multifonctional PLC Length ControlOpt.Opt.Opt.
Mechanical footage counter in Feet/MetersOpt.Opt.Opt.
Safety Options :
CSA – UL InspectionOpt.Opt.Opt.
Other Options:
Optional blade lubrification mistOpt.Opt.Opt.
Optional blade lubrification with bottle and blade wipeOpt.Opt.Opt.
Optional blade heater systemOpt.Opt.Opt.
Stainless steel cutter bushingOpt.Opt.Opt.
Stainless steel cutter headOpt.Opt.Opt.
Dual configuration application on common base or stager depending on Y-block configurationOpt.Opt.Opt.
Electrics:
230-460-575V AC / 3PH / 60 Hz, 380-400V AC / 3PH / 50 HzYesYesYes
CustomizableYesYesYes

Servo Fly-Knife Cutter Specifications (CSFK Series)

Standard FeaturesCSFK 125CSFK 25CSFK 35CSFK 45CSFK 65CSFK 85
Cutting Window1″ OD2.25″ OD3.25″ OD4.25″ OD6.25″OD8.25″ OD
Cuts-per-minute in start/stop modeNeed InfoNeed InfoNeed InfoNeed InfoNeed InfoNeed Info
Cuts-per-minute in constant cut modeNeed InfoNeed infoNeed InfoNeed InfoNeed infoNeed Info
Bushing Diameter1.25″ OD2.5″ OD3.5″ OD4.5″ OD6.5″ OD8.5″ OD
Maximum Cut length999,999.99″999,999.99″999,999.99″999,999.99″999,999.99″999,999.99″
Longitudinal setting12″12″12″12″12″12″
Cut length accuracy +/- .015 inchYesYesYesYesYesYes
Integrated Electronic Length Control with encoderYesYesYesYesYesYes
Batch CountYesYesYesYesYesYes
Programmable recipiesYesYesYesYesYesYes
Easy choice of cut length on Touch ScreenYesYesYesYesYesYes
Robust frame provides additional stability and supportYesYesYesYesYesYes
Longer safety tunels at entrace and exitYesYesYesYesYesYes
Line direction:
Right to LeftYesYesYesYesYesYes
Left to RigthYesYesYesYesYesYes
Length controller Options :
Multifonctional PLC Length ControlOpt.Opt.Opt.Opt.Opt.Opt.
Mechanical footage counter in Feet/MetersOpt.Opt.Opt.Opt.Opt.Opt.
Safety Options :
CSA – UL InspectionOpt.Opt.Opt.Opt.Opt.Opt.
Other Options:
Optional blade lubrification mistOpt.Opt.Opt.Opt.Opt.Opt.
Optional blade lubrification with bottle and blade wipeOpt.Opt.Opt.Opt.Opt.Opt.
Optional blade heater systemOpt.Opt.Opt.Opt.Opt.Opt.
Stainless steel cutter bushingOpt.Opt.Opt.Opt.Opt.Opt.
Stainless steel cutter headOpt.Opt.Opt.Opt.Opt.Opt.
Dual configuration application on common base or stager depending on Y-block configurationOpt.Opt.Opt.Opt.Opt.Opt.
Planetary gearbox for extra cutting torque Model changed to HTYesYesYesYesYesYes
Electrics:
230-460-575V AC / 3PH / 60 Hz, 380-400V AC / 3PH / 50 HzYesYesYesYesYesYes
CustomizableYesYesYesYesYesYes

Servo Rotary Fly-Knife Cutter Specifications (CSRK Series)

Standard FeaturesCSRK 45CSRK 65CSRK 8
Cutting Window4.25″ OD6.25″ OD8.25″ OD
Cuts-per-minute in start/stop modeNeed InfoNeed InfoNeed Info
Cuts-per-minute in constant cut modeNeed InfoNeed infoNeed Info
Bushing Diameter4.5″ OD6.5″ OD8.5″ OD
Maximum Cut length999,999.99″999,999.99″999,999.99″
Cut length accuracy +/- .062 inchYesYesYes
Integrated Electronic Length Control with encoderYesYesYes
Batch CountYesYesYes
Programmable recipiesYesYesYes
Easy choice of cut length on Touch ScreenYesYesYes
Robust frame provides additional stability and supportYesYesYes
Longer safety tunels at entrace and exitYesYesYes
Line direction:
Right to LeftYesYesYes
Left to RigthYesYesYes
Length controller Options :
Multifonctional PLC Length ControlOpt.Opt.Opt.
Mechanical footage counter in Feet/MetersOpt.Opt.Opt.
Safety Options :
CSA – UL InspectionOpt.Opt.Opt.
Other Options:
Optional blade lubrification mistOpt.Opt.Opt.
Optional blade lubrification with bottle and blade wipeOpt.Opt.Opt.
Optional blade heater systemOpt.Opt.Opt.
Stainless steel cutter bushingOpt.Opt.Opt.
Stainless steel cutter headOpt.Opt.Opt.
Dual configuration application on common base or stager depending on Y-block configurationOpt.Opt.Opt.
Planetary gearbox for extra cutting torque model changed to HTYesYesYes
Electrics:
230-460-575V AC / 3PH / 60 Hz, 380-400V AC / 3PH / 50 HzYesYesYes
CustomizableYesYesYes

Traveling Hot Knife Specifications (CutPro Series)

Standard FeaturesCutPro 200CutPro 400
Cut Window4.5″ x 8″6.5″ x 13″
Heated BladeYesYes
Brake motor for quick blade stopYesYes
Cut length accuracy +/- .125 inchYesYes
Quick Change Clamp CleatYesYes
Integrated Electronic Length Control with encoderYesYes
Batch CountYesYes
Programmable recipiesYesYes
Easy choice of cut length on Touch ScreenYesYes
Hot Blade Control via Touch ScreenYesYes
Robust frame provides additional stability and supportYesYes
Fully inclosed safety cageYesYes
Longer safety tunels at entrace and exitYesYes
Line direction:
Right to LeftYesYes
Left to RigthYesYes
Safety Options :
CSA – UL InspectionOpt.Opt.
Length controller Options :
Electronic Length Control Dual presetOpt.Opt.
Multifonctional PLC Length ControlOpt.Opt.
Mechanical footage counter in Feet/MetersOpt.Opt.
Other Options:
Dual configuration application on common base or stager depending on Y-block configurationOpt.Opt.
Servo Control Table TravelOpt.Opt.
Electrics:
230-460-575V AC / 3PH /  60 Hz, 380-400V AC / 3PH / 50 HzYesYes
CustomizableYesYes

Combination Belt Puller/C-Sharp Cutter Specifications (CCBVSH Series)

Standard FeaturesCCBVSH 9.5-125CCBVSH 2-25CCBVSH 3-25CCBVSH 4-45CCBVSH 6-65
Puller Specification
Conveyer length9.5″18″18″25″25″
Conveyor width2″2″3″4″6″
Contact Area for 2″9.5″ L x 2″ W18″ L x 2″ W
Contact Area for 3″18″ L x 3″ W
Contact Area for 4″25″ L x 4″ W
Contact Area for 6″25″ L x 4″ W
Max. Conveyor Opening3″3″3″7″7″
Manual self-centering conveyor heght adjustmentYesYesYes
Manual individual beam height adjustmentYesYes
Adjustable entrance guide rollersYesYesYesYesYes
Duragrip Puregum beltsYesYesYesYesYes
Vector motor/drive control systemYesYesYesYesYes
Digital speed displayYesYesYesYesYes
10 turn Potentiometer speed adjustmentYesYesYesYesYes
Master/Follower seclector switchYesYesYesYesYes
Cutter Specification
Cutting Capacity1″ OD2.25″ OD2.25″ OD4.25″ OD6″ OD
Bushing Diameter1.5″ OD2.5″ OD2.5″ OD4.5″ OD6.5″ OD
Maximum Cut length19,999.99″19,999.99″19,999.99″19,999.99″19,999.99″
Longitudinal setting12″12″12″12″12″
Cut length accuracy +/- .030 inchYesYesYesYesYes
Integrated Electronic Length Control with encoderYesYesYesYesYes
Easy choice of cut length on Touch ScreenYesYesYesYesYes
Robust frame provides additional stability and supportYesYesYesYesYes
Longer safety tunels at entrace and exitYesYesYesYesYes
Commun Options
Line direction:
Right to LeftYesYesYesYesYes
Left to RigthYesYesYesYesYes
Safety Options :
Safety enclosureOpt.Opt.Opt.Opt.Opt.
CSA – UL InspectionOpt.Opt.Opt.Opt.Opt.
Electrics:
230-460-575V AC / 3PH /  60 Hz, 380-400V AC / 3PH / 50 HzYesYesYesYesYes
Puller Options
Clamping Option:
Upper beam Pneumatic ClampingOpt.Opt.Opt.Opt.Opt.
Bottom conveyor fixed/adjustable top conveyorOpt.Opt.Opt.Opt.Opt.
 Remote control Option:
50′ remote controlOpt.Opt.Opt.Opt.Opt.
75′ remote controlOpt.Opt.Opt.Opt.Opt.
100′ remote controlOpt.Opt.Opt.Opt.Opt.
Motor control Option:
Inverter motor/drive control systemOpt.Opt.Opt.Opt.Opt.
Vector direct drive (2 motors, 2 drives, 2 gear boxes) control systemOpt.Opt.Opt.Opt.Opt.
Servo motor/drive control system includes touch screenOpt.Opt.Opt.Opt.Opt.
Servo direct drive (2 motors, 2 drives, 2 gear boxes) control system includes touch screenOpt.Opt.Opt.Opt.Opt.
Belt option:
Natural rubberOpt.Opt.Opt.Opt.Opt.
FDA-compliantOpt.Opt.Opt.Opt.Opt.
Belt contourred to productOpt.Opt.Opt.Opt.Opt.
Footage counter options:
Mechanical Footage CounterOpt.Opt.Opt.Opt.Opt.
Digital Footage CounterOpt.Opt.Opt.Opt.Opt.
Length CounterOpt.Opt.Opt.Opt.Opt.
Patriot GAP IndicatorOpt.Opt.Opt.Opt.Opt.
Other options:
Dual configuration application on common base or stager depending on Y-block configurationOpt.Opt.Opt.Opt.Opt.
Touch screen operational control (not servo)Opt.Opt.Opt.Opt.Opt.
CustomizableYesYesYesYesYes
Cutter Options
Other Options:
Optional blade lubrification mistOpt.Opt.Opt.Opt.Opt.
Optional blade lubrification with bottle and blade wipeOpt.Opt.Opt.Opt.Opt.
Optional blade heater systemOpt.Opt.Opt.Opt.Opt.
Stainless steel cutter bushingOpt.Opt.Opt.Opt.Opt.
Stainless steel cutter headOpt.Opt.Opt.Opt.Opt.
Dual configuration application on common base or stager depending on Y-block configurationOpt.Opt.Opt.Opt.Opt.
CustomizableYesYesYesYesYes

Combination Belt Puller/Servo Fly-Knife Cutter Specifications (CCBSSK Series)

Standard FeaturesCCBSSK 9.5-125CCBSSK 2-25CCBVSSK 3-25CCBVSSK 4-45CCBVSSK 6-45
Puller Specification
Conveyer length9.5″18″18″25″25″
Conveyor width2″2″3″4″6″
Contact Area for 2″9.5″ L x 2″ W18″ L x 2″ W
Contact Area for 3″18″ L x 3″ W
Contact Area for 4″25″ L x 4″ W
Contact Area for 6″25″ L x 6″ W
Max. Conveyor Opening3″3″3″7″7″
Manual self-centering conveyor heght adjustmentYesYesYes
Manual individual beam height adjustmentYesYes
Adjustable entrance guide rollersYesYesYesYesYes
Duragrip Puregum beltsYesYesYesYesYes
Vector motor/drive control systemYesYesYesYesYes
Digital speed displayYesYesYesYesYes
10 turn Potentiometer speed adjustmentYesYesYesYesYes
Master/Follower seclector switchYesYesYesYesYes
Cutter Specification
Cutting Capacity1″ OD2.25″ OD2.25″ OD4.25″ OD4.25″ OD
Bushing Diameter1.5″ OD2.5″ OD2.5″ OD4.5″ OD4.5″ OD
Maximum Cut length999,999.99″999,999.99″999,999.99″999,999.99″999,999.99″
Longitudinal setting12″12″12″12″12″
Cut length accuracy +/- .015 inchYesYesYesYesYes
Integrated Electronic Length Control with encoderYesYesYesYesYes
Batch CountYesYesYesYesYes
Programmable recipiesYesYesYesYesYes
Easy choice of cut length on Touch ScreenYesYesYesYesYes
Robust frame provides additional stability and supportYesYesYesYesYes
Longer safety tunels at entrace and exitYesYesYesYesYes
Commun Options
Line direction:
Right to LeftYesYesYesYesYes
Left to RigthYesYesYesYesYes
Safety Options :
Safety enclosureOpt.Opt.Opt.Opt.Opt.
CSA – UL InspectionOpt.Opt.Opt.Opt.Opt.
Electrics:
230-460-575V AC / 3PH /  60 Hz, 380-400V AC / 3PH / 50 HzYesYesYesYesYes
Puller Options
Clamping Option:
Upper beam Pneumatic ClampingOpt.Opt.Opt.Opt.Opt.
Bottom conveyor fixed/adjustable top conveyorOpt.Opt.Opt.Opt.Opt.
 Remote control Option:
50′ remote controlOpt.Opt.Opt.Opt.Opt.
75′ remote controlOpt.Opt.Opt.Opt.Opt.
100′ remote controlOpt.Opt.Opt.Opt.Opt.
Motor control Option:
Inverter motor/drive control systemOpt.Opt.Opt.Opt.Opt.
Vector direct drive (2 motors, 2 drives, 2 gear boxes) control systemOpt.Opt.Opt.Opt.Opt.
Servo motor/drive control system includes touch screenOpt.Opt.Opt.Opt.Opt.
Servo direct drive (2 motors, 2 drives, 2 gear boxes) control system includes touch screenOpt.Opt.Opt.Opt.Opt.
Belt option:
Natural rubberOpt.Opt.Opt.Opt.Opt.
FDA-compliantOpt.Opt.Opt.Opt.Opt.
Belt contourred to productOpt.Opt.Opt.Opt.Opt.
Footage counter options:
Mechanical Footage CounterOpt.Opt.Opt.Opt.Opt.
Digital Footage CounterOpt.Opt.Opt.Opt.Opt.
Length CounterOpt.Opt.Opt.Opt.Opt.
Patriot GAP IndicatorOpt.Opt.Opt.Opt.Opt.
Other options:
Dual configuration application on common base or stager depending on Y-block configurationOpt.Opt.Opt.Opt.Opt.
Touch screen operational control (not servo)Opt.Opt.Opt.Opt.Opt.
CustomizableYesYesYesYesYes
Cutter Options
Other Options:
Optional blade lubrification mistOpt.Opt.Opt.Opt.Opt.
Optional blade lubrification with bottle and blade wipeOpt.Opt.Opt.Opt.Opt.
Optional blade heater systemOpt.Opt.Opt.Opt.Opt.
Stainless steel cutter bushingOpt.Opt.Opt.Opt.Opt.
Stainless steel cutter headOpt.Opt.Opt.Opt.Opt.
Dual configuration application on common base or stager depending on Y-block configurationOpt.Opt.Opt.Opt.Opt.
Planetary gearbox for extra cutting torque Model changed to HTYesYesYesYesYes
CustomizableYesYesYesYesYes

Combination Belt Puller/Rotary Fly-Knife Cutter Specifications (CCBVSRK Series)

Standard FeaturesCCBVSRK 25-45CCBVSRK 25-65CCBVSRK 36-65CCBVSRK 36-8CCBVSRK 48-8CCBVSRK 60-8
Puller Specification
Conveyer length25″25″36″36″45″60″
Conveyor width4″6″6″8″8″8″
Contact Area for 4″25″ L x 4″ W
Contact Area for 6″25″ L x 6″ W36″ L x 6″ W36″ L x 6″ W
Contact Area for 8″45″ L x 8″ W45″ L x 8″ W
Max. Conveyor Opening7″7″7″7″7″7″
Manual individual beam height adjustmentYesYesYesYesYesYes
Adjustable entrance guide rollersYesYesYesYesYesYes
Duragrip Puregum beltsYesYesYesYesYesYes
Vector motor/drive control systemYesYesYesYesYesYes
Digital speed displayYesYesYesYesYesYes
10 turn Potentiometer speed adjustmentYesYesYesYesYesYes
Master/Follower seclector switchYesYesYesYesYesYes
Cutter Specification
Cutting Capacity4.25″ OD6.25″ OD6.25″ OD8.25″ OD8.25″ OD8.25″ OD
Bushing Diameter4.5″ OD6.5″ OD6.5″ OD8.5″ OD8.5″ OD8.5″ OD
Maximum Cut length999,999.99″999,999.99″999,999.99″999,999.99″999,999.99″999,999.99″
Cut length accuracy +/- .062 inchYesYesYesYesYesYes
Integrated Electronic Length Control with encoderYesYesYesYesYesYes
Batch CountYesYesYesYesYesYes
Programmable recipiesYesYesYesYesYesYes
Easy choice of cut length on Touch ScreenYesYesYesYesYesYes
Robust frame provides additional stability and supportYesYesYesYesYesYes
Longer safety tunels at entrace and exitYesYesYesYesYesYes
Commun Options
Line direction:
Right to LeftYesYesYesYesYesYes
Left to RigthYesYesYesYesYesYes
Safety Options :
Safety enclosureOpt.Opt.Opt.Opt.Opt.Opt.
CSA – UL InspectionOpt.Opt.Opt.Opt.Opt.Opt.
Electrics:
230-460-575V AC / 3PH /  60 Hz, 380-400V AC / 3PH / 50 HzYesYesYesYesYesYes
Puller Options
Clamping Option:
Upper beam Pneumatic ClampingOpt.Opt.Opt.Opt.Opt.Opt.
Bottom conveyor fixed/adjustable top conveyorOpt.Opt.Opt.Opt.Opt.Opt.
 Remote control Option:
50′ remote controlOpt.Opt.Opt.Opt.Opt.Opt.
75′ remote controlOpt.Opt.Opt.Opt.Opt.Opt.
100′ remote controlOpt.Opt.Opt.Opt.Opt.Opt.
Motor control Option:
Inverter motor/drive control systemOpt.Opt.Opt.Opt.Opt.Opt.
Vector direct drive (2 motors, 2 drives, 2 gear boxes) control systemOpt.Opt.Opt.Opt.Opt.Opt.
Servo motor/drive control system includes touch screenOpt.Opt.Opt.Opt.Opt.Opt.
Servo direct drive (2 motors, 2 drives, 2 gear boxes) control system includes touch screenOpt.Opt.Opt.Opt.Opt.Opt.
Belt option:
Natural rubberOpt.Opt.Opt.Opt.Opt.Opt.
FDA-compliantOpt.Opt.Opt.Opt.Opt.Opt.
Belt contourred to productOpt.Opt.Opt.Opt.Opt.Opt.
Footage counter options:
Mechanical Footage CounterOpt.Opt.Opt.Opt.Opt.Opt.
Digital Footage CounterOpt.Opt.Opt.Opt.Opt.Opt.
Length CounterOpt.Opt.Opt.Opt.Opt.Opt.
Patriot GAP IndicatorOpt.Opt.Opt.Opt.Opt.Opt.
Other options:
Dual configuration application on common base or stager depending on Y-block configurationOpt.Opt.Opt.Opt.Opt.Opt.
Touch screen operational control (not servo)Opt.Opt.Opt.Opt.Opt.Opt.
CustomizableYesYesYesYesYesYes
Cutter Options
Other Options:
Optional blade lubrification mistOpt.Opt.Opt.Opt.Opt.Opt.
Optional blade lubrification with bottle and blade wipeOpt.Opt.Opt.Opt.Opt.Opt.
Optional blade heater systemOpt.Opt.Opt.Opt.Opt.Opt.
Stainless steel cutter bushingOpt.Opt.Opt.Opt.Opt.Opt.
Stainless steel cutter headOpt.Opt.Opt.Opt.Opt.Opt.
Dual configuration application on common base or stager depending on Y-block configurationOpt.Opt.Opt.Opt.Opt.Opt.
CustomizableYesYesYesYesYesYes

Takeaway Conveyors Specifications (CTC Series)

Standard FeaturesCTC 1.5CTC 3CTC 4CTC 6CTC 8
Conveyer length3′, 4′, 6′, 8′, 10′, 12′, 16′, 18′, 20′ and 24′3′, 4′, 6′, 8′, 10′, 12′, 16′, 18′, 20′ and 24′3′, 4′, 6′, 8′, 10′, 12′, 16′, 18′, 20′ and 24′3′, 4′, 6′, 8′, 10′, 12′, 16′, 18′, 20′ and 24′3′, 4′, 6′, 8′, 10′, 12′, 16′, 18′, 20′ and 24′
Conveyor width1.5″3″4″6″6″
Conveyor size with 3′ length1.5″ W x 3′ L3″ W x 3′ L4″ W x 3′ L6″ W x 3′ L6″ W x 3′ L
Conveyor size with 4′ length1.5″ W x 4′ L3″ W x 4′ L4″ W x 4′ L6″ W x 4′ L6″ W x 4′ L
Conveyor size with 6′ length1.5″ W x 6′ L3″ W x 6′ L4″ W x 6′ L6″ W x 6′ L6″ W x 6′ L
Conveyor size with 8′ length1.5″ W x 8′ L3″ W x 8′ L4″ W x 8′ L6″ W x 8′ L6″ W x 8′ L
Conveyor size with 10′ length1.5″ W x 10′ L3″ W x 10′ L4″ W x 10′ L6″ W x 10′ L6″ W x 10′ L
Conveyor size with 12′ length1.5″ W x 12′ L3″ W x 12′ L4″ W x 12′ L6″ W x 12′ L6″ W x 12′ L
Conveyor size with 16′ length1.5″ W x 16′ L3″ W x 16′ L4″ W x 16′ L6″ W x 16′ L6″ W x 16′ L
Conveyor size with 18′ length1.5″ W x 18′ L3″ W x 18′ L4″ W x 18′ L6″ W x 18′ L6″ W x 18′ L
Conveyor size with 20′ length1.5″ W x 20′ L3″ W x 20′ L4″ W x 20′ L6″ W x 20′ L6″ W x 20′ L
Conveyor size with 24′ length1.5″ W x 24′ L3″ W x 44′ L4″ W x 24′ L6″ W x 24′ L6″ W x 24′ L
Air Discharge to collection TrayYesYesYesYesYes
Inverter motor/drive control systemYesYesYesYesYes
Digital speed displayYesYesYesYesYes
10 turn Potentiometer speed adjustmentYesYesYesYesYes
Master/Follower seclector switchYesYesYesYesYes
Line direction:
Right to LeftYesYesYesYesYes
Left to RigthYesYesYesYesYes
Safety Options :
CSA – UL InspectionOpt.Opt.Opt.Opt.Opt.
Other options:
Pneumatic Discharge with Push Arm to Collection TrayOpt.Opt.Opt.Opt.Opt.
Controlled via Saw/CutterOpt.Opt.Opt.Opt.Opt.
Product RejectionOpt.Opt.Opt.Opt.Opt.
Stainless stell collection TrayOpt.Opt.Opt.Opt.Opt.
Dual configuration application on common base or stager depending on Y-block configurationOpt.Opt.Opt.Opt.Opt.
Touch screen operational control (not servo)Opt.Opt.Opt.Opt.Opt.
Batch counter with Ligth Tower and BuzzerYesYesYesYesYes
Electrics:
230-460-575V AC / 3PH /  60 Hz, 380-400V AC / 3PH / 50 HzYesYesYesYesYes
CustomizableYesYesYesYesYes

Semi-Automatic Coil Winder Specifications (CCW Series)

Standard FeaturesCCW 1CCW 2
Maximum Spool Diameter54″22″
Spool width24″12″
Numbeer of Spools12
No Tool Spool Change OverYesYes
Selector Switch for Upper or Lower SpoolYes
Air Clutch for Slippage ControlYesYes
Vector motor/drive control systemYesYes
Dancer with Variable Speed ControlYesYes
Digital speed displayYesYes
10 turn Potentiometer speed adjustmentYesYes
Manual/Automatic seclector switchYesYes
Heavy Duty Support FrameYesYes
Digital Footage CounterYesYes
Line direction:
Right to LeftYesYes
Left to RigthYesYes
Safety Options :
Safety enclosureYesYes
CSA – UL InspectionOpt.Opt.
Motor control Option:
Servo motor/drive control system includes touch screenOpt.Opt.
Other options:
Touch screen operational control (not servo)Opt.Opt.
Footage counter options:
Length CounterOpt.Opt.
Electrics:
230-460-575V AC / 3PH /  60 Hz, 380-400V AC / 3PH / 50 HzYesYes
CustomizableYesYes

Automatic Coil Winder Specifications (CAW Series)

Standard FeaturesCAW 1CAW 2
Maximum Spool Diameter54″22″
Spool width24″12″
Numbeer of Spools12
No Tool Spool Change OverYesYes
Selector Switch for Upper or Lower SpoolYes
Air Clutch for Slippage ControlYesYes
Mechanical Traverse MechanisimYesYes
On/Off Traversing FonctionYesYes
Vector motor/drive control systemYesYes
Dancer with Variable Speed ControlYesYes
Digital speed displayYesYes
10 turn Potentiometer speed adjustmentYesYes
Manual/Automatic seclector switchYesYes
Heavy Duty Support FrameYesYes
Digital Footage CounterYesYes
Line direction:
Right to LeftYesYes
Left to RigthYesYes
Safety Options :
Safety enclosureOpt.Opt.
CSA – UL InspectionOpt.Opt.
Motor control Option:
Servo motor/drive control system includes touch screenOpt.Opt.
Other options:
Touch screen operational control (not servo)Opt.Opt.
Footage counter options:
Length CounterOpt.Opt.
Electrics:
230-460-575V AC / 3PH /  60 Hz, 380-400V AC / 3PH / 50 HzYesYes
CustomizableYesYes

Pay-Off Specifications (CPO Series)

Standard FeaturesCPO 37
Spool Diameter64″
Spool width37″
Numbeer of Spools1
No Tool Spool Change OverYes
Air Clutch for Slippage ControlYes
Heavy Duty Support FrameYes
Line direction:
Right to LeftYes
Left to RigthYes
Safety Options :
Safety enclosureOpt.
CSA – UL InspectionOpt.
Footage counter options:
Mechanical Footage CounterOpt.
Digital Footage CounterOpt.
Length CounterOpt.
CustomizableYes

Rim Pay-Off Specifications (CRW Series)

Standard FeaturesCRW 1
Spool Diameter64″
Spool width36″
Numbeer of Spools1
No Tool Spool Change OverYes
Air Clutch for Slippage ControlYes
Vector motor/drive control systemYes
Dancer with Variable Speed ControlYes
Digital speed displayYes
10 turn Potentiometer speed adjustmentYes
Manual/Automatic seclector switchYes
Heavy Duty Support FrameYes
Line direction:
Right to LeftYes
Left to RigthYes
Safety Options :
Safety enclosureYes
CSA – UL InspectionOpt.
Motor control Option:
Servo motor/drive control system includes touch screenOpt.
Other options:
Touch screen operational control (not servo)Opt.
Footage counter options:
Mechanical Footage CounterOpt.
Digital Footage CounterOpt.
Length CounterOpt.
Electrics:
230-460-575V AC / 3PH /  60 Hz, 380-400V AC / 3PH / 50 HzYes
CustomizableYes

Help & Resources