Medical

Medical

CDS’s expertise has allowed us to penetrate international markets with the Medical Applications for biotechnologies, pharmaceutical and medical processes.

Our medical extrusion systems are designed for consistent accuracy and precision.  Built of stainless steel according to medical industry standards, they may be used in a clean room environment for easy maintenance. Our High Precision Vacuum Sizing Tank (CMPVS series), Water Cooling Tank (CMWT series), Belt Haul-Off, Takeaway Conveyor (CMTC series) have already been successfully implemented in the industry.

Medical Cutter Puller Medical Medline Medical Takeaway Conveyor Medical Tank

Vacuum Calibration Tables Specifications (CVC Series)

Standard FeaturesCMPVS 6CMPVS 8CMPVS 10
Tank Cross Section6″ x 6″8″ x 8″12″ x 12″
Tank Length Available6′, 8′, 10′ and 12′6′, 8′, 10′, 12′, 14′, 16′ and 18′6′, 8′, 10′, 12′, 14′, 16′ and 18′
316L Stainless Steel Tank ConstructionYesYesYes
316L Stainless Steel Water Turbulance BarYesYesYes
Flood Vacuum SizingYesYesYes
PLC Comtrolled Closed Loop Vacuum Up to 130 inH20YesYesYes
Water Turbulance BarYesYesYes
Hinged Tempered Glass CoversYesYesYes
Rotary Standpipe Water Level Adjustment From outside of TankYesYesYes
Heavy Duty Support FrameYesYesYes
Mounted on Non-Marking CastersYesYesYes
Pandulum Mounted Operator Panel with Touch Screen DisplayYesYesYes
Vacuum read-out &/or control settingsYesYesYes
Vacuum level display vs. set pointYesYesYes
Precise vacuum setting & controlYesYesYes
Automatic or Manual Vacuum mode via Touch ScreenYesYesYes
Motorized Longitudinal MovementYesYesYes
3-Axis Precision MovementYesYesYes
Line direction:
Right to LeftYesYesYes
Left to RigthYesYesYes
Safety Options :
CSA – UL InspectionOpt.Opt.Opt.
Compartment Configurations:
Compartment Length Availables2′, 4′, 6′, 8′, 10′ and 12′2′, 4′,6′, 8′, 10′, 12′, 14′, 16′ and 18′2′, 4′,6′, 8′, 10′, 12′, 14′, 16′ and 18′
Water Well CompartmentOpt.Opt.Opt.
Consult Factory for Customizable Comportments lengthsYesYesYes
Water Options:
Recirculation System (From 54GPM to 100GPM)Opt.Opt.Opt.
Vaccum Blower (Up to 3HP)Opt.Opt.Opt.
Plate and Frame Heat Exchanger (From 12, 000Btu/h to 80,000Btu/h)Opt.Opt.Opt.
Stainless Steel Basket FilterOpt.Opt.Opt.
Loop Control Heater SystemOpt.Opt.Opt.
Temperature ControlOpt.Opt.Opt.
Dual Stainless Steel Filter with BypassOpt.Opt.Opt.
Other options:
Stainless Steel FrameOpt.Opt.Opt.
Air Wipe SystemOpt.Opt.Opt.
Possibility of temperature read-out & controlOpt.Opt.Opt.
Possibility of OD detection device close-loop controlOpt.Opt.Opt.
UV Water Purifier
Tooling Plate/Water Style Calibration Sleeve
Tooling – Pre Skinner
Electrics:
230-460-575V AC / 3PH /  60 Hz,                                    380-400V AC / 3PH / 50 HzYesYesYes
CustomizableYesYesYes

Medical Water Tank Specifications (CMWT Series)

Standard FeaturesCMWT 6CMWT 8CMWT 10
Tank Cross Section6″ x 6″8″ x 8″10″ x 10″
Tank Length Available8′, 10′, 12′, 14′, 16′, 18′, 20′, 24′ and 30′8′, 10′, 12′, 14′, 16′, 18′, 20′, 24′ and 30′8′, 10′, 12′, 14′, 16′, 18′, 20′, 24′ and 30′
316L Stainless Steel Tank ConstructionYesYesYes
316L Stainless Steel Water Turbulance BarYesYesYes
Heavy Duty Support FrameYesYesYes
Mounted on Non-Marking CastersYesYesYes
Pandulum Mounted Operator PanelYesYesYes
Line direction:
Right to LeftYesYesYes
Left to RigthYesYesYes
Safety Options:
CSA – UL InspectionOpt.Opt.Opt.
Water Options:
Recirculation System (From 54GPM to 100GPM)Opt.Opt.Opt.
Plate and Frame Heat Exchanger (From 12, 000Btu/h to 80,000Btu/h)Opt.Opt.Opt.
Stainless Steel Basket FilterOpt.Opt.Opt.
Loop Control Heater SystemOpt.Opt.Opt.
Temperature ControlOpt.Opt.Opt.
Dual Stainless Steel Filter with BypassOpt.Opt.Opt.
Other options:
Stainless Steel FrameOpt.Opt.Opt.
Air Wipe SystemOpt.Opt.Opt.
Foam Insulation for water optionsOpt.Opt.Opt.
Optional Touch Screen ControlOpt.Opt.Opt.
Electrics:
230-460-575V AC / 3PH /  60 Hz,                            380-400V AC / 3PH / 50 HzYesYesYes
CustomizableYesYesYes

Combination Medical Belt Puller/Servo Fly-Knife Cutter Specifications (CCBSSK series)

Standard FeaturesCCBSSK 9.5-125CCBSSK 2-25CCBVSSK 3-25CCBVSSK 4-45CCBVSSK 6-45
Puller Specification
Conveyer length9.5″18″18″25″25″
Conveyor width2″2″3″4″6″
Contact Area for 2″9.5″ L x 2″ W18″ L x 2″ W
Contact Area for 3″18″ L x 3″ W
Contact Area for 4″25″ L x 4″ W
Contact Area for 6″25″ L x 6″ W
Max. Conveyor Opening3″3″3″7″7″
Manual self-centering conveyor heght adjustmentYesYesYes
Manual individual beam height adjustmentYesYes
Adjustable entrance guide rollersYesYesYesYesYes
Duragrip Puregum beltsYesYesYesYesYes
Vector motor/drive control systemYesYesYesYesYes
Digital speed displayYesYesYesYesYes
10 turn Potentiometer speed adjustmentYesYesYesYesYes
Master/Follower seclector switchYesYesYesYesYes
Cutter Specification
Cutting Capacity1″ OD2.25″ OD2.25″ OD4.25″ OD4.25″ OD
Bushing Diameter1.5″ OD2.5″ OD2.5″ OD4.5″ OD4.5″ OD
Maximum Cut length999,999.99″999,999.99″999,999.99″999,999.99″999,999.99″
Longitudinal setting12″12″12″12″12″
Cut length accuracy +/- .015 inchYesYesYesYesYes
Integrated Electronic Length Control with encoderYesYesYesYesYes
Batch CountYesYesYesYesYes
Programmable recipiesYesYesYesYesYes
Easy choice of cut length on Touch ScreenYesYesYesYesYes
Robust frame provides additional stability and supportYesYesYesYesYes
Longer safety tunels at entrace and exitYesYesYesYesYes
Commun Options
Line direction:
Right to LeftYesYesYesYesYes
Left to RigthYesYesYesYesYes
Safety Options :
Safety enclosureOpt.Opt.Opt.Opt.Opt.
CSA – UL InspectionOpt.Opt.Opt.Opt.Opt.
Electrics:
230-460-575V AC / 3PH /  60 Hz, 380-400V AC / 3PH / 50 HzYesYesYesYesYes
Puller Options
Clamping Option:
Upper beam Pneumatic ClampingOpt.Opt.Opt.Opt.Opt.
Bottom conveyor fixed/adjustable top conveyorOpt.Opt.Opt.Opt.Opt.
Remote control Option:
50′ remote controlOpt.Opt.Opt.Opt.Opt.
75′ remote controlOpt.Opt.Opt.Opt.Opt.
100′ remote controlOpt.Opt.Opt.Opt.Opt.
Motor control Option:
Inverter motor/drive control systemOpt.Opt.Opt.Opt.Opt.
Vector direct drive (2 motors, 2 drives, 2 gear boxes) control systemOpt.Opt.Opt.Opt.Opt.
Servo motor/drive control system includes touch screenOpt.Opt.Opt.Opt.Opt.
Servo direct drive (2 motors, 2 drives, 2 gear boxes) control system includes touch screenOpt.Opt.Opt.Opt.Opt.
Belt option:
Natural rubberOpt.Opt.Opt.Opt.Opt.
FDA-compliantOpt.Opt.Opt.Opt.Opt.
Belt contourred to productOpt.Opt.Opt.Opt.Opt.
Footage counter options:
Mechanical Footage CounterOpt.Opt.Opt.Opt.Opt.
Digital Footage CounterOpt.Opt.Opt.Opt.Opt.
Length CounterOpt.Opt.Opt.Opt.Opt.
Patriot GAP IndicatorOpt.Opt.Opt.Opt.Opt.
Other options:
Dual configuration application on common base or stager depending on Y-block configurationOpt.Opt.Opt.Opt.Opt.
Touch screen operational control (not servo)Opt.Opt.Opt.Opt.Opt.
CustomizableYesYesYesYesYes
Cutter Options
Other Options:
Optional blade lubrification mistOpt.Opt.Opt.Opt.Opt.
Optional blade lubrification with bottle and blade wipeOpt.Opt.Opt.Opt.Opt.
Optional blade heater systemOpt.Opt.Opt.Opt.Opt.
Stainless steel cutter bushingOpt.Opt.Opt.Opt.Opt.
Stainless steel cutter headOpt.Opt.Opt.Opt.Opt.
Dual configuration application on common base or stager depending on Y-block configurationOpt.Opt.Opt.Opt.Opt.
Planetary gearbox for extra cutting torque Model changed to HTYesYesYesYesYes
CustomizableYesYesYesYesYes

Medical Takeaway Conveyor Specifications (CMTC Series)

Standard FeaturesCMTC 2CMTC 4
Conveyer length 6′,  10′, 12′ and 14′ 6′,  10′, 12′ and 14′
Conveyor width2″4″
Conveyor size with 6′ length2″ W x 6′ L4″ W x 6′ L
Conveyor size with 10′ length2″ W x 10′ L4″ W x 10′ L
Conveyor size with 12′ length2″ W x 12′ L4″ W x 12′ L
Conveyor size with 14′ length2″ W x 14′ L4″ W x 14′ L
316L Stainless Steel Collection TrayYesYes
Air Discharge to collection TrayYesYes
Digital speed displayYesYes
10 turn Potentiometer speed adjustmentYesYes
Master/Follower seclector switchYesYes
Line direction:
Right to LeftYesYes
Left to RigthYesYes
Safety Options :
CSA – UL InspectionOpt.Opt.
Other options:
Controlled via Puller/CutterOpt.Opt.
Product RejectionOpt.Opt.
Stainless stell collection TrayOpt.Opt.
Dual configuration application on common base or stager depending on Y-block configurationOpt.Opt.
Touch screen operational control (not servo)Opt.Opt.
Batch counter with Ligth Tower and BuzzerYesYes
Electrics:
230-460-575V AC / 3PH /  60 Hz, 380-400V AC / 3PH / 50 HzYesYes
CustomizableYesYes

Medical Roll Wheel Haul-Off Specifications (C2RHM Series)

Standard FeaturesC2RHM 2
Roller O.D.4″
Roller width2″
Numbeer or Rollers2 – 1 Top and 1 Bottom
Max. Roller Opening2″
Manual Top and Bottom Roller adjustmentYes
Adjustable entrance guide rollersYes
Vector motor/drive control systemYes
Touch Screen Operator Control PanelYes
Line direction:
Right to LeftYes
Left to RigthYes
Safety Options:
Safety enclosureYes
CSA – UL InspectionOpt.
Clamping Option:
Top Roll pneumatic clampingYes
Manual self-centering conveyor height adjustmentOpt.
 Remote control Option:
50′ remote controlOpt.
75′ remote controlOpt.
100′ remote controlOpt.
Motor control Option:
Vector direct drive (2 motors, 2 drives, 2 gear boxes) control systemOpt.
Servo motor/drive control systemOpt.
Servo direct drive (2 motors, 2 drives, 2 gear boxes) control systemOpt.
Footage counter options:
Mechanical Footage CounterOpt.
Digital Footage CounterOpt.
Length CounterOpt.
Patriot GAP IndicatorOpt.
Other options:
4″ Roller widthOpt.
Electrics:
230-460-575V AC / 3PH / 60 Hz, 380-400V AC / 3PH / 50 HzYes
CustomizableYes

Help & Resources